Looking for a 308 GT4 steering wheel

The CORRECT steering wheel is not avail as a new part. It should be a 3 spoke Momo, with silver spokes, solid spokes, & almost 15" in diameter. There are some used ones out there, but you can expect to pay quite a bit for them.

 

I met someone a few years ago that had found New/Old stock..

I have recently heard Momo was going to reproduce some of the older patterns as well.....for vintage applications.

Only other source would be FerrariUk Classic Parts department......

I also met a gent at 2004FFQC with two, he drives with one and changes to a brand new one for judging.....

 

Tex, Momo is indeed releasing some of the older wheels. Sorry to say, not the one for the GT4/400/400i/308.

Ferrari UK says NLA. I tried them.

 

Darn!

Sorry to hear.......I guess you could always refurbish the thing....

Thanks!

 

<laughing> just noticed the last line in your message. We could debate that one

I've seen really nice used wheels bring $600 US.
Beat up ones that you won't want bring around $150 US.

 

Yea, that was no sig........a custom job....nice!

 

There is no photo but this sounds like the correct wheel

 

http://www.reoriginals.com/browseproducts/Steering-wheel--leather-covered-MOMO-Prototipo-...---N0027E.HTML

 

Nope, that is a Prototipo which is not the correct wheel for a GT4/400/400i/308

 

got this left over from my old GT4
Image Unavailable, Please Login

 

Close, but that isn't the correct wheel for the GT4 either.

 

Well...I tried to upload a pic I have of my steering wheel, but I know it does not take 5 minutes to transfer a 96kb file - something must be wrong with the server, as I know my connection's good.

 

Here is the correct steering wheel for a GT4.

It is the same as an early 400/400i/308.

Roughly 15" in diameter.

.
Image Unavailable, Please Login

 

Yep....that's the one I've got here in my box of parts.

 

I have been looking for the same wheel for my '78 308. I did manage to find the prototipo with the holes in it but no solid spokes. I started stripping the finish off mine and found out it's really in decent shape under all that worn lacquer. I'm going to put the "hole-y" one on and work on re-finishing the stock one for now.

BTW, the stock one is slightly larger than the new one too.


.

 

Do you still have the Momo wheel?

 

I might have one if he doesn’t send me a PM.

 

That thread is 15 years old

 

Yes, I’m aware of the thread’s age. That doesn’t change my reply.