GMC evap can 24.50 from Ebay works great . Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
After a very long time looking for what I think would be the perfect fasteners for engine bay covers I choose these from ProBolt USA. ProBolt has the very best looking and and quality on the market hands down !! Image Unavailable, Please Login
Using these for air box covers duel drive heads and race drilled holes drilling small holes on the air box tabs and will safety wire them they are known to vibrate lose. Image Unavailable, Please Login
You should one less thing that can go wrong and above you can see there is allot of weight can be saved. The owner of the gated 360 he is a huge car guy and very very very picky about his cars he is using my 360 CS conversion as a blue print. I take that a huge complement he could not believe I that I was able to find a good fix for deleting evap system.
Engine mount bolts had the spacer washer custom made two 16mm bolt 32.49 a piece 16mm nut 15.10 each spacers 200.00 each Wrap fuel tank heat shields in tunnel shield .
Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
Yes, this is a spider. This is the product from DEI. Going to do the lower air intake box by the muffler next week. I'll post some pictures when done.
I sent my CS Lexan door glass to plastics4performance in the UK so they can pattern them they were happy a have them. In turn they are giving a front windshield & two rear quarter glass and a extra set of CS Lexan glass. Wend I pulled the factory CS Lexan glass from the window frames did not no the front glass was not Lexan glass but real glass ? Alex at Plastics4Performance said the factory CS Lexan glass was basically garbage there glass was way superior. They are using the factory CS pull handles should finish this week.
Would be interesting to see what the ally frame detailed looked like and whether they would be possible to fabricate . I assume it's an extrusion . Great job Randy
Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
Fitting every thing up after almost two years, the rear CS heat shields fitted perfect painting them to match airbox. Game changer using Tunnel heat shield fantastic stuff !! Every single new titanium torque to speck and mark with torque seal .
Factory wraps the ac lines after twenty years they fall apart and the heat shields they use for ac compressor and alternator are a very thin piece of aluminum not very good heat shields my guess they want you to my new ones ? Remade new ac and alternators heat shields and wrap with tunnel shield and rewrap ac lines with new DEI COOL-TAPE .
