2001 360 side mirrors | FerrariChat
Buy

2001 360 side mirrors

Discussion in '360/430' started by ceb39, Aug 21, 2021.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. ceb39

    ceb39 Formula Junior

    Sep 17, 2012
    483
    San Francisco Area
    Full Name:
    Chuck B
    #1 ceb39, Aug 21, 2021
    The device in the center console controls the movement of the two side mirrors. Mine works fine for the right side mirror, but when I push the button for the left mirror, it seems difficult to press and I can not move the left mirror. Any one have any ideas what might be the problem, and how to fix it?

    ceb
     
  2. Qavion

    Qavion F1 World Champ
    Silver Subscribed

    Feb 20, 2015
    13,918
    Sydney
    Full Name:
    Ian Riddell
    #2 Qavion, Aug 21, 2021
    Is the controller suffering from stickiness? (surface degradation).
    Is the panel clipped into the holder properly (i.e. sitting flush/straight)?

    Image Unavailable, Please Login

    It's obviously a mechanical problem, perhaps some plastic part broken or jammed, but I don't know what would happen if you tried to separate the black and green sections.

    New panels seem to be still available (P/N 191046), but not all that cheap.
     
  3. ceb39

    ceb39 Formula Junior

    Sep 17, 2012
    483
    San Francisco Area
    Full Name:
    Chuck B
    #3 ceb39, Aug 22, 2021
    Went out to the car just after reading a reply to my post. Pushed the left button down. It worked. Was able to move the mirror, up, down, left, right. Have no idea why it did not work yesterday, and works today. One problem down two to go.

    Thanks for the help
    ceb
     
    Qavion likes this.
  4. one4torque

    one4torque F1 Veteran
    Silver Subscribed

    May 20, 2018
    5,598
    Houston
    Full Name:
    One4torque
    #4 one4torque, Aug 22, 2021
    Switch could be a little dirty. Quirky old car stuff.
     
    KC360 FL likes this.
  5. ceb39

    ceb39 Formula Junior

    Sep 17, 2012
    483
    San Francisco Area
    Full Name:
    Chuck B
    #5 ceb39, Aug 22, 2021
    Good idea. Will blow it out with a can of air, same as my keyboard.

    Thanks
    ceb
     
  6. FiatAbarth850

    FiatAbarth850 Karting

    Aug 2, 2020
    100
    Winnipeg, Manitoba, Canada
    Full Name:
    Bill H.
    #6 FiatAbarth850, Aug 23, 2021
    ceb, google "switch and contact cleaner" and buy a can to use on your switch. It's better than compressed air as it has solvents that clean the contacts and also remove sticky stuff, like spilled Pepsi, that may be hindering a switch operation. It is great stuff and very useful. Good luck, Bill
     
    KC360 FL likes this.
  7. one4torque

    one4torque F1 Veteran
    Silver Subscribed

    May 20, 2018
    5,598
    Houston
    Full Name:
    One4torque
    #7 one4torque, Aug 23, 2021
    Agree bill… but be careful to not get it on the rubberized coating.
     
  8. FiatAbarth850

    FiatAbarth850 Karting

    Aug 2, 2020
    100
    Winnipeg, Manitoba, Canada
    Full Name:
    Bill H.
    #8 FiatAbarth850, Aug 23, 2021
    One4torque..."rubberized coating"....do you mean the "sticky button" coating? Will switch and contact cleaner remove sticky button goop? Hmmm. Why ask the question, why not go out to the garage and try it? Be back in a second.

    (some time later)
    You're right!! That stuff makes a just-starting-to-get-sticky button into a terrible sticky mess. So, OP, be sure to use Contact Cleaner to get the switch working properly again but DON'T get it on the buttons!
     
    tonyc and one4torque like this.
  9. one4torque

    one4torque F1 Veteran
    Silver Subscribed

    May 20, 2018
    5,598
    Houston
    Full Name:
    One4torque
    #9 one4torque, Aug 23, 2021
    Bill- funny commentary!
     

Share This Page