355 Ferrari F355 Challenge Steering rack

Can they rebuild a standard rack to Fiorano rack specs?

 

I received the same answer from ZF. No go availability or a rebuild service from them. They said there wasn't enough demand for them to offer remanufactured units.

If one has a leak/issue and the rack needs to come out, I see no reason why one wouldn't try to put in the quicker rack if the opportunity presented itself.

 

Here is your chance...

How to rebuild a power steering rack F355 | FerrariChat

 

Perfect! Now we know who to send em too .

 

Yes Thank you!! - That is a great how to! and I guess the idea about a quicker rack must be suspended..

 

Only hope now is to open up a Fiorano rack and have the rack and pinion reproduced to the exact same specs.

 

Has anyone confirmed with absolute certainty what the lock to lock turn on the Fiorano rack is ? I've heard anywhere from 2.25 to 2.75 turns.

 

https://www.ferrarichat.com/forum/threads/how-to-remove-the-steering-rack-from-a-355.430060/

 

I have a source that can reproduce the parts, just need the source parts...

 

There's one hella used one in Japan asking $5500 before shipping cost. It will surely need rebuilding. I'd actually pay $5k for a new one. Desperate times ... hmmmmmm

 

https://page.auctions.yahoo.co.jp/jp/auction/m354701733

So how bad do we want a quick steering rack?

 

This might be the ONLY opportunity ever the Fchat 355 community will ever get anything remotely close to a quick steering rack upgrade.

 

5k....me bollocks!

 

When I do a search for a quick rack and pinion manufacturer, one name seems to pop up over and over. Quaife (UK).

https://www.quaife.co.uk/quaife-products/motorsport-steering-racks/

 

Hi, has anyone tried to contact them about a rack for the F355 - and if not maybe several mails from F-chatters could make them consider?

 

!0 years ago i had a bunch of BMW e21 quick racks built as they where not available in the market place they where about $400 each for the rack and pinion, they could only do manual racks not PAS racks at the time.

The UK has a cottage industry of motorsport manufacturing you can get pretty much anything made in small volume, of course it costs more.

Rack and Pinion Steering Cars Vans Motor Sport Classic (steering-racks.co.uk)

 

What must absolutely reproduce, in my opinion, are the stabilizer bars of the 355 Challenge !!!

 

https://www.flamingriver.com/custom-parts

There are a few US companies that do custom racks as well.

 

100%.

 

What was the process? Did you simply give them the standard rack and pinion and said, “duplicate these but give them quicker steering specs?”

If so, did you have to tell them how many turns lock to lock you wanted or they just simply made quicker specs?

 

Here’s a cheap used standard rack we can send them to open up. If they can spec it properly without seeing the actual Fiorano rack, that would save alot of headache.

https://www.ebay.com/itm/95-99-Ferrari-355-F355-OEM-STEERING-RACK-AND-PINION-USED-FOR-PARTS-/114178433871?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l6249&mkrid=711-127632-2357-0


If not, then we’ll have to bite the bullet and buy a Fiorano rack, have them open it up and duplicate the rack and pinion to exact specs.

 

I see these guys have a long list of offerings for Fiat and Alfa Romeo cars. Good chance they are familiar with TRW steering racks.

 

If you can, well for my taste in driving I would prefer a little quicker steering ratio for one of my cars (silver one)
Electric prius steering units. Know a few guys running them that are modded and they swear by them.
Well carry on Happy Labor Day

 

Can you confirm the lock to lock turns for the Challenge rack and how much quicker you prefer?

 

I have three 355 lhd racks here, they all have 3.25 turns lock to lock, one of which I removed from a factory 355 challenge, which looked to have never been changed out from new (its the top one dated 1996)

The only difference I can see is that the 1994 dated one has a full tag, where as the other later two have a corner cut off the tag to avoid a revised casing change.

I am UK based, if anyone wants to buy one and have it sent to a UK rack specialist for analysis and replication just drop me a private message.








Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login