360 What is this part number?

65512300 Rear underpanel, will probably have to find one used, there are a few on ebay right now.

https://www.ebay.com/itm/114655580609?fits=Make:Ferrari&epid=1811209045&hash=item1ab20151c1:g:mCYAAOSwlztgEzsD

Edit: looks like Eurospares has new in stock..

https://www.eurospares.co.uk/search?partNumber=65512300

 

Yeah, it's all one piece. The part in red is the part that covers the area in your pictures.

Image Unavailable, Please Login

 

From your pictures, it looks like you are missing your entire bellypan anyway. You are going to want that in place to protect all the overpriced crap above it. Even a damaged one is better than none at all.

 

As above, if you can see the engine block.. a rock can kick up there and damage something really expensive. The bottom of the car should be a flat expanse of black fiberglass panel. Get a used underpanel and install it with 10mm bolts with the rear wheels on ramps in your driveway. Will take 15 minutes.

 

Yeah, you're missing the entire under tray, you're going to want that back on there. It was designed in a wind tunnel and that tray does serve a purpose.

 

Plus it captures little drips so you feel better

def get one on there.


You can find used

gl

 

I had to lift my car with a floor jack and put the ramps in backwards. It made it much easier to slide under the car and get the floor pan out from under the car. Several of your 10mm bolts may be missing, mine were. All of yours may be missing if you currently don’t have a belly pan. Get fifteen 1/2” long ones and fifteen 3/4” long ones. You’ll have a few left over. They should have a large area washer on them too.


Sent from my iPhone using FerrariChat.com mobile app