Dyno Capability | FerrariChat

Dyno Capability

Discussion in 'Vintage (thru 365 GTC4)' started by dgunn365, Oct 13, 2021.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. dgunn365

    dgunn365 Formula Junior
    Silver Subscribed

    Dec 15, 2006
    250
    New London, NH
    Full Name:
    David Gunn
    #1 dgunn365, Oct 13, 2021
    We are considering an 'as it is now dyno run for our Daytona motor'. It was assembled some time ago, before we bought the car, and not run since. It is clear that some internal parts are new but details are lacking. We have looked inside and what we see looks good. The question is where to do the test. We have very positive prior experience with Ed Pink RE. Just wondered what other options there may be in CA.
     
  2. John Vardanian

    John Vardanian F1 Rookie

    Jul 1, 2004
    3,045
    San Francisco Area
    Full Name:
    John Vardanian
    #2 John Vardanian, Oct 14, 2021
    In Berkeley, CA, Hasselgren (in conjunction with Otis) should have the fittings for dynoing a 251 motor.

    john
     
  3. dgunn365

    dgunn365 Formula Junior
    Silver Subscribed

    Dec 15, 2006
    250
    New London, NH
    Full Name:
    David Gunn
    #3 dgunn365, Oct 14, 2021
    Thank you.
     
  4. tritone

    tritone F1 Veteran
    Silver Subscribed

    Dec 8, 2003
    6,880
    On the Rock
    Full Name:
    James
    #4 tritone, Oct 14, 2021
    Dennison Intl. Motorsports, Puyallup (near Seattle) Washington.
     
  5. dgunn365

    dgunn365 Formula Junior
    Silver Subscribed

    Dec 15, 2006
    250
    New London, NH
    Full Name:
    David Gunn
    #5 dgunn365, Oct 16, 2021
    Thank you.
     

Share This Page