What are these two things? | FerrariChat

What are these two things?

Discussion in 'Mondial' started by Bad Dogg, Oct 22, 2021.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Bad Dogg

    Bad Dogg Formula Junior

    Sep 29, 2006
    433
    Avon, CT
    Full Name:
    Howard
    In the front trunk of my 3.2, on the passenger side. I looked through all the service/workshop manuals but couldn't figure out what they were. TIA!
     

    Attached Files:

    AUDIO RESEARCH likes this.
  2. mike32

    mike32 F1 Veteran

    May 13, 2016
    5,835
    Isle of man- uk
    The vertical cylinder is the filter drier for the ac system. Not sure on the other bit ( might be the service indicator unit ??)
     
    Bad Dogg likes this.
  3. AUDIO RESEARCH

    AUDIO RESEARCH Formula Junior

    Feb 11, 2009
    355
    PHILIPPINES
    Full Name:
    LUIGI RAYMUND LIRA
    AC Drier but you have no high pressure switch and the motor solenoid for the auto release of the front bonnet .
     
    Bad Dogg likes this.
  4. mike32

    mike32 F1 Veteran

    May 13, 2016
    5,835
    Isle of man- uk
    The pressure switch is under the wiring cover i think.
     
    Bad Dogg likes this.
  5. MvT

    MvT F1 Rookie

    May 25, 2013
    4,248
    The Netherlands - NH
    Full Name:
    Tijn
    The black box is to reset your service/maintenance light in the console. I have done it once. Can't really remember the steps. Looking for it, but I cannot seem to find it anymore :S
     
  6. MvT

    MvT F1 Rookie

    May 25, 2013
    4,248
    The Netherlands - NH
    Full Name:
    Tijn
    Here is some info
    87 mondial 3.2 maintnance reset | FerrariChat
     
    Bad Dogg likes this.
  7. Bad Dogg

    Bad Dogg Formula Junior

    Sep 29, 2006
    433
    Avon, CT
    Full Name:
    Howard
    Thank you all very much! Super helpful. I could not find a manual with detailed drawings of the car showing the various piece in situ, like I have seen for American and Japanese cars. I thought I had most of the available Mondial literature. Are there manuals/drawings available like I describe or do I just have to come onto FChat to learn what is going on?? ;)
     
  8. mike32

    mike32 F1 Veteran

    May 13, 2016
    5,835
    Isle of man- uk
    I was thinking that was what it was, if i remember right you have to push a button using a long thin rod like a welding rod to reset it. ??
     
  9. afterburner

    afterburner F1 Rookie
    Silver Subscribed

    Jun 20, 2008
    3,215
    Hong Kong
    small screw driver, it's just a flat surface inside that needs to be pressed about 1mm to reset the counter. No worries, nothing can be broken just press it in and you'll hear a small plop.
     
    MvT likes this.

Share This Page