Hi all Currently reassembling dual plate clutch and I’m struggling to get 2 bolts to engage The bolting of the clutch to the flywheel is via 4 hex socket and 2 hex head bolts I can see on the flywheel there are 4 through holes and 2 blind holes. Do these correspond with the above bolts? Picture to make more interesting! Image Unavailable, Please Login Sent from my iPhone using FerrariChat
Carful, the bolts stretch when you reuse them they can damage the voith and you'll throw grease. All my bolts are the same, length, head, and pitch, thought they were all hex head on my dual plate clutch. Sent using FerrariChat.com mobile app
If you look at the parts diagram, you will see that all 6 bolts are same, hex head. Image Unavailable, Please Login
Thanks both [emoji106] I also spotted on the parts diagram that they are meant to be 6 hex head bolts. I’ve seen photos of someone else’s clutch with the same combo as mine so wasn’t sure if there was a reason I’ve ordered some fresh ones Sent from my iPhone using FerrariChat
