Four post lift

I have a Lift Superstore 8k and yes it does just fine. Using the aluminum ramps but I believe they are the same as the steel ones usually included as far as length.


Sent from my iPhone using Tapatalk

 

I have a 4 post lift with the steel ramps and it clears it.


Sent from my iPad using FerrariChat.com mobile app

 

I'd be curious if you can open the doors of an F430/360 when it's on the lower level of the auto-stacker without leaving the bottom car hanging out 1/3 or if that is the only way it works? The only video I see on their website with the door opening has the bottom car backing in, If that is the case, then it's a good reason not to get an Autostacker.

 

I use longer Race Ramps


Sent from my iPhone using Tapatalk

 

I don’t see any distinct advantage to the autostacker other than perhaps looks? You end up with reduced flexibility.


Sent from my iPhone using Tapatalk

 

whatever goes on the lift, never comes down, fwiw.

 

+1. And so light

Sent from my moto g power using Tapatalk

 

Stock height should clear no problem


Sent from my iPhone using FerrariChat

 

Doesn't a 4 post allow you to work on the underside of the car? Or not quite enough clearance?

The Autostacker looks tre cool, but seems much more limited in function since you can't get to the underside of the car.

Even just for parking, seems to have drawbacks as Corey points out

 

Totally true… I don’t use the metal ramps that came with the Bendpak because they are so damn heavy!


Sent from my iPhone using Tapatalk

 

Aw come on Ricky!
At least once a month I’ll let it down.
I only wish I had it hooked up to 220V.
Now if I only had a rotating 8 stacker….


Sent from my iPhone using Tapatalk