488 Ferrari or Aftermarket front lifts?

From the angle I see in the pic,it could be a trade off; using the lift at that angle might lower the diffuser.

 

100% in that situation if you had a front lift and used it you would scrape your rear diffuser

 

You may need to regrade the driveway

 

Has your car been lowered?

 

If you enter that grade at a 45 degree angle it likely should not scrape.

 

I would bet that most if not all of the electric wiring already exists for the factory system. I looked up the parts to do it a couple of years ago and it was around $3000. I'd call around to see what it would cost to have it installed.

 

I ended up buying a car that already had the lift so I never followed through. Any competent shop should be able to do it.

 

I asked my dealer about adding it to a 458 SpecialeA and he said the parts were $13k and not in stock. Novitec has one with a lowering kit too I believe.

 

Obviously you need to move and find a new house.

 

Are you near a dealer where you can borrow a 458/488 with a lift and test it? My cars are not lowered - I go up a ramp into my warehouse at work everyday. I have no issues (with my lift on)

 

If KW makes one for a 488. This one is for 458: https://www.vividracing.com/hls-front-lift-oem-suspension-upgrade-kit-ferrari-458-italia-f142-coupe-convertible-20102015-p-151469947.html

 

I was thinking the same thing

 

My Pista has the Novitec kit, works really well and I have a similarly sloped driveway. https://tagmotorsports.com/novitec-ferrari-488-pista-sport-springs-with-height-adjustment