My hot rod 308 with NTM wheels

This car is an 83 quattrovalvole with a prancing horse kit, I removed most of the us spec stuff such as the big ugly diaper the mirrors the front and rear bumpers the bumper guards etc.

 

I m not sure if I want to weld on the car, but if you noticed the front marker lights are red as well as the tail lights

 

Twin turbo, and I put in QA-1 shocks

 

17 rear 16 front, not welded

 

Yes and both et 12

 

Image Unavailable, Please Login Image Unavailable, Please Login

 

No it was an aftermarket kit that was made by a company called prancing horse

 

I lowered my car using the QA one shocks and the upper shock eye from unobtainium supply the upper Shock mount has a notch in it to clear the control arm in the front . I’m not sure if these wheels would fit a car with stock Koni shocks but in any case the wheels fit perfectly and there was no modifications needed whatsoever to the wheel arch or the inner wheel well or rolling the fender lip etc. NTM recommended an offset of ET 12 for both front and rear and like I said they fit perfectly

 

I bought the NTM wheels through Alpha9supply, they are the US distributor for NTM