360 F1 Trans will not engage in AUTO mode

I would start with a battery reset then check "auto" button console with voltmeter

 

Here's a wiring diagram of the internals of the panel (courtesy of Speedworks FRS).

Image Unavailable, Please Login

Basically, check the resistance between pin 3 on the control panel (i.e. which corresponds with the black earth wire... if you can see wire colours on the matching connector) and pin 6 (which corresponds to the pink wire on the car connector).

Image Unavailable, Please Login

i.e. Button not pushed = open circuit. Button pushed = closed circuit (0 ohms)

Full wiring diagram here (Modena):

https://www.dropbox.com/t/SGbHhBtH2iGqAzPg

 

360 Spider full wiring diagram here:

https://www.dropbox.com/t/AMyFDUDwvAd754jJ

Both 360 F1 diagrams have my latest corrections

Links expire in 6 days.