360 Where to buy coolant hoses for the 360(?)

Your description isn't quite specific enough to be sure.... but the two primary hoses we see folks purchase are:

https://www.ricambiamerica.com/181733-tubo-gomma-d-35-42-44-51-80.html

and

https://www.ricambiamerica.com/181742-tubo-gomma-d-35-42-5-curvo-a-80.html

Both are in stock.

The heat exchanger and associated hoses, gaskets, and stuff are also all in stock. You might need some, all, or none of it... but feel free to call me tomorrow if you want to discuss: https://www.ricambiamerica.com/180846-360.html

 

Ricambi is always a go-to, but are you looking for OEM or upgraded? I've been getting in the habit of replacing my hoses with reinforced silicone. Just seems better than the problematic Ferrari stuff.

 

Our car is now old cars. I had one of my lower ones burst on my F430 a month ago. Upon inspection I found a couple more ready to burst. I replaced everything underneath and ordering all the hoses as they’re getting hard to get. Some straight hoses or similar sizes I was able to get silicone but there are no kits available for F430, I hope there are for 360, as I would probably go that way. Coolant hoses deteriorate with time, not mileage, so I suggest to replace them all

 

In ref to the straight or right angle sections it is more economic to buy from an aftermarket specialist. You can buy 1 mtr lengths or right angle sections. Be sure it suits the coolant you are using.

 

Please share pn’s and source when you settle on a lot of hoses.

Ill just copy your order..my 2001 is due.

 

i actually was looking to remove mine and send them to samco to have them recreate them since I've had good experiences with their stuff on my bikes but I just haven't gotten around to it...perhaps someone in the UK could volunteer!

 

Love samco products but there are many good places in the states to get a good 4 ply or 3 ply silicone hose for the straight parts. The curved ones could be tricky

 

Using the part numbers from the parts diagram has always worked flawlessly for me. I have the new and old versions in .pdf. I find them extremely valuable for understanding how things are supposed to be.

 

Scuderia Rampante Innovations has good quality hoses for 360s.

Coolant Hose Kits - Scuderia Rampante

 

I just looked at their site but no hoses for the f430. I know this thread is for the 360 so im going to start a thread for the f430 to keep them seperate

 

You can blame the A-holes at Ferrari for that. They had to change the entire site after they forbade them to used the exploded diagrams.

As far as hoses go, I've replaced many of my hoses with https://vibrantperformance.com/silicone-hose-and-clamps/

Of course there are no kits so you just have to measure, cut and compare. I'd have to look through my old orders but maybe someday I can compile a list of part numbers.

 

I thought Ferrari used silicon hoses on the F430 or is that just the later ones? I asked my mechanic about proactively replacing hoses and he said most of mine are already silicon.

 

Not that I know off. All the one I ordered in the last month is all rubber

 

What year is your car? In the parts diagram, almost every "rubber" hose has been superseded for new part numbers. Are you sure you received the latest revision parts?

 

yes I recevied latest part. Eurospares said they had to order it from Ferrari.
My car is 2007.