OBD2 Scanning Problems | Page 2 | FerrariChat

OBD2 Scanning Problems

Discussion in '348/355' started by Laserman, May 11, 2020.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. puddas

    puddas Rookie

    Jan 31, 2011
    10
    Gday I have the connection ready to test my obd2. Can anyone recommend what is the best power supply to run the connector? Ie a battery or like a connection to the cigarette lighter


    Image Unavailable, Please Login
     
  2. Qavion

    Qavion F1 World Champ
    Silver Subscribed

    Feb 20, 2015
    14,516
    Sydney
    Full Name:
    Ian Riddell
    You have mail ;)
     
  3. Laserman

    Laserman Karting

    Oct 26, 2018
    113
    Minneapolis, MN
    Qavion:

    Finally, got my wheels back from the refinisher and new rubber.

    I can confirm that Pin 16 on my OBD2 plug goes to Fuse 29 as marked in the owners manual behind the kick plate on the right passenger side.

    Had the car out for a good hour yesterday with no CEL's (yeah).

    I think that bent pin to the O2 sensor heater was what was throwing the codes.

    Hope this is the info you wanted.

    Thanks again for your help.

    Laserman
     
    Qavion likes this.
  4. Qavion

    Qavion F1 World Champ
    Silver Subscribed

    Feb 20, 2015
    14,516
    Sydney
    Full Name:
    Ian Riddell
    Excellent, thanks for your feedback. I'll update my diagram.
     
  5. Jamesal925

    Jamesal925 Rookie

    Aug 3, 2022
    11

    I see this is an old thread however I need this diagram and the link doesn’t seem to be working. If you could email it to me or if you have an alternate link I could use that would be greatly appreciated :cool:
     
  6. Qavion

    Qavion F1 World Champ
    Silver Subscribed

    Feb 20, 2015
    14,516
    Sydney
    Full Name:
    Ian Riddell
    You also have mail :cool:
     

Share This Page