Help finding clutch slave support part 201282. | FerrariChat
Buy

Help finding clutch slave support part 201282.

Discussion in 'Technical Q&A' started by 360+Volt=Prius, Jun 21, 2023.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. 360+Volt=Prius

    360+Volt=Prius Formula 3
    Silver Subscribed

    Sep 1, 2013
    1,762
    Western Mass
    Full Name:
    Raimondo
    #1 360+Volt=Prius, Jun 21, 2023
  2. FerrariofAlberta

    FerrariofAlberta Karting
    Silver Subscribed

    Feb 24, 2021
    153
    Full Name:
    Scott McMonigle
    #2 FerrariofAlberta, Jun 29, 2023
    That is a much needed part, I was on the hunt for a long time. Our Ferrari locator shows some dealers in Europe having them, but that is it.

    If you find one (or some), let me know

    Thanks
    Scott
     
  3. Ferrarium

    Ferrarium F1 Veteran
    Sponsor Rossa Subscribed

    Jul 28, 2018
    5,728
    Central NJ
    Full Name:
    Eric
    #3 Ferrarium, Jun 29, 2023
    Seems easy enough to make using local machine shop, definitely stronger.

    Sent from my SM-G990U using FerrariChat.com mobile app
     
  4. tbakowsky

    tbakowsky Two Time F1 World Champ
    Consultant Professional Ferrari Technician

    Sep 18, 2002
    20,042
    The Cold North
    Full Name:
    Tom
    #4 tbakowsky, Jun 29, 2023
    If your car is a manual transmission...as in has a clutch pedal..you do not need that part. If it is an F1 car..i.e 2 pedals then you do need that part to hold the position sensor.
     
  5. 360+Volt=Prius

    360+Volt=Prius Formula 3
    Silver Subscribed

    Sep 1, 2013
    1,762
    Western Mass
    Full Name:
    Raimondo
    #5 360+Volt=Prius, Jun 29, 2023
    Important to mention, 3 pedal cars (at least mine) and pics in the WSM don’t have the F1 studs. These studs would be required to be added if deleting this plastic part. In three pedal cars this plastic part acts to limit travel, and rotation of the TOB. both functions would be done by the studs.

    I purchased a pair of the studs from ricambi for ~50 bucks. Which is a lot less than this part can be fabricated for.

    So here is another question this part was updated to allow increased resting (= clutch not depressed) travel. why has the travel of the TOB be increased from 27.8mm to 30mm?

    Also would this 2.2mm of increased travel cause increased resting pressure of the TOB on the PP perhaps contributing to earlier TOB failure.


    I have seen a couple of threads on TOB failures.
     
  6. 360+Volt=Prius

    360+Volt=Prius Formula 3
    Silver Subscribed

    Sep 1, 2013
    1,762
    Western Mass
    Full Name:
    Raimondo
    #6 360+Volt=Prius, Jul 3, 2023
    Any experienced folks able to comment on the increased TOB travel from ~28mm to 30mm,m? I have shared some data and pics in the 360 section thread.

    Thanks in advance
    -ray
     

Share This Page