Hello New 360 owner from Norway. I have spent some time de-sticking my interior and removed the inner door handle at drivers side. I have put everything together. The drivers door lock button seems to not lock the car. If I press it nothing happens. If I press the passenger door button it locks and unlocks both passenger and drivers door. I would expect a similar function on the drivers door. Unlocking and locking the car from the key fob is ok. Someone have an idea of what is wrong? Have I messed up some adjustments when having things apart? Br Martin
check the length of the metal rod under the interior arm rest. Might need to be extended or tightened with the adjustment nuts. Lift the black padded arm rest upwards from the pointed REAR and it should lift out. You'll see the adjustment screws there.
Thanks, was the adjustment of the rod. Only problem now is that when I push the button down to lock the rod is pushed down and jammed against the adjustment mechansim for the handle. Will have a closer look at it tomorrow. Martin
Still striving with the operation of the inner dor lock button. When pushing to lock the rod does not move far enough back to engage the locking mechanism. Seems to me it is too much flex in the mechanism. I have tried to adjustment with no luck. I notice some play where the rod attaches to the door lock button. Could it be worn out? Can the lock itself be adjusted to engage lock with the rod not pushed so far back. Any suggestions appreciated First picture shows the rod when I have pushed the button lock. Second picture shows the rod fully pushed back in lock position when locking with the key. Image Unavailable, Please Login Image Unavailable, Please Login
