For Sale Ferrari 308 Garage Sale of Small Parts

1978 Ferrari 308 GTS (USA carburetor model) Parts List

I recently sold my Ferrari 308. I purchased it in December 2000 with 22,000 miles. In April, 2021 I undertook a major restoration to rebuild, repair or refurbish all the major systems of the car. As I took parts off, I carefully inspected, cleaned and catalogued the parts. Most of the following parts are in very good condition, have more life in them and have only traveled 22,000 miles. Some others are new. I would prefer to sell most of these parts as a lot or in major groups.

PM for details, prices and pictures or make an offer for the lot.

Dashpot with bracket
2 Front, amber side marker lights, Seima, # 46.48.7005 rubber base: #45.38 lens 1 Front, amber side marker light, Carello, #14.505.523
1 Front, amber side marker light, Carello, #14.500.718]
Red, door jamb warning light, Alissimo, 2119/GM/4709/1
2 rear e-brake cable grommets, brand new
4 rubber, brake lines, with original ATE band with 7/78 date
3 original ATE rubber bleeder screw caps
4 original brake caliper hard lines (“S” shaped, approx.. 3-4”)
2 rear, brake caliper e-brake screw covers
4 original brake caliper bleed screws
Air box flap, diaphram vacuum valve
2 Engine mount (dogbone) shims
4 sniffer tubes, rear bank
Oil filler cap, brand new
3 emergency flasher relays: all 3 prong, round units: Novita 550 brand new in box, Novita 1224B
Sipea 6010 7K8E

Relays-Brand new in box
2 Bosch 0 332 019 151 896 Brown plastic case

Relays-Used metal case, made in Germany
1 Bosch 0 332 015 006 Grey metal case
3 Bosch 0 332 204 101 Grey metal case with orange diagonal 5 Bosch 0 332 014 113 Grey metal case

5 black bezels for instrument panel warning lights (reproduction, bezel only, no lights)
1 original black bezel for instrument warning light (no light)
2 original engine block petcocks
1 green bayonet bulb for console illumination, #40143307 (fits in brake lever )
Copiglia metal banding strap with two tightening mechanisms (band goes around air box rubber connector Lengths 27”, 24”, 20”

1 air pump pulley and 1 air pump belt
1 Fiamm “snail” horn, Made in Italy, CH 5 0602-06 30071 30077 E3
Suspension alignment shims: (1) 07mm; (4) 08mm; (1) 1.0mm; (1) 1.2mm
2 original, door jamb switches, black plunger
1 Momo horn button, slight blemish on yellow background
2 Magnetti Marelli coils, # BZR202A
2 Magnetti Marelli resistors, # 478 R80K and # 378 R80K
2 Magnetti Marelli condensers, # CE291 T FO.25 with single black wire
2 Magnetti Marelli condensers with double, black wires for R2 points set-up 1 new set of points for R1 set- up with short wire
1 new set of points for R2 set-up with long wire
4 used set of points short wire
7 black, spark plug extenders
3 spark plug wire holders with grommets
1 set of original seat belts
4 2-valve pistons, 81mm #2677 inside
Cam cover nuts, used

 

What is the condition for the four sniffer tubes and how much?

 

This is an approved Garage Sale ad.

 

Price and pix of seatbelts

 

PM sent

 

PM sent

 

Pm sent

 

Seatbelts-SOLD

 

I sent a PM I definately need the red door lamp fixture.
I can use the black extenders as well..

Thanks!

Tons of "good bits" there I am just really knocked back with medical issues right now!
Gonna get well though..
Here, hold my beer..

 

I'd need those four pistons too!
Maybe..

Send a price..
Thaanks!!

 

Bubba

Door lamps $40
7 black extenders $50
4 pistons $250

shipping $20

Total $360

Joe

Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login

 

Hey PM me your address I will get your Money Order out today!!

Not able to zelle yet...

 

Still available? Interested in the pistons!

 

Hi,
I would like the 4 brake callipe hard lines. I’m in the UK.,thanks

 

Your $$ for the red lamp is one the way 3 Day Priority with USPS

Thanks

Will also circle back for the extenders if no one tales them

 

The pistons sold or no???

I want those just on my desk, but really hedge from ever needing one or two....
I suppose the rubber bellows clamps also..

We will get it all out of there!!!

 

PM sent

 

SOLD spark plug extenders


Sent from my iPhone using FerrariChat

 

Anyone have a 308 GTS QV 1985 clock for sale? Also looking for some guidance on how to install the horn and where it is as it is not present on mine?

Thanks!

 

I have a “snail” horn for sale.
$50 plus shipping

It mounts to the top of the front cross member between the fans

 

I realize old thread but did you ever sell the "Sniffer Tubes"?

 

Still have them, as well as other parts.

 

Could you PM me a list of items?
I’m working on early 308’s
Thx Bill

 

PM sent