COP on a 2.7 F355? | Page 2 | FerrariChat

COP on a 2.7 F355?

Discussion in '348/355' started by F355Bob, Nov 10, 2017.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

Page 2 of 2
  1. 355 P4

    355 P4 Karting

    Joined:
    Oct 13, 2020
    Messages:
    135
    Location:
    So. California
    Full Name:
    Bill Krueger
    Oh, the plug covers are sitting on 1/4" aluminum standoffs just to promote some air circulation.
     
    355 P4, Jul 5, 2022
    #26
  2. SoCal1

    SoCal1 F1 Veteran Owner

    Joined:
    Jun 14, 2011
    Messages:
    8,636
    Location:
    SoCal LA/OC/New Mexico
    Full Name:
    Tim Dee
    WOW, all 3 looked different to me LOL

    Looks like a blast to play with :)
     
    SoCal1, Jul 5, 2022
    #27
  3. 355 P4

    355 P4 Karting

    Joined:
    Oct 13, 2020
    Messages:
    135
    Location:
    So. California
    Full Name:
    Bill Krueger
    The passenger side bank I converted first and I held the 1/4" stand-off bushings with a curved pair of pliers while inserting slightly longer screws but on my second attempt I JB Welded the bushings to the bottom of the cover so I would have to worry about dropping a bushing down a spark plug hole forcing me to remove the cover and start over. If I want to remove the spacers at some point it won't be hard to snap them off and grind/file the back of the cover flat again.
    I cut to length and reterminated my plug wires utilizing 45 degree boots at the coils.
     
    355 P4, Jul 5, 2022
    #28
    SoCal1 likes this.
  4. 355 P4

    355 P4 Karting

    Joined:
    Oct 13, 2020
    Messages:
    135
    Location:
    So. California
    Full Name:
    Bill Krueger
    Later developments have me changing plugs to Denso Iridium and at the same time installing rubber bushings were the plug wires pass through the aluminum plug cover plates
    Image Unavailable, Please Login
     
    355 P4, Nov 29, 2023
    #29
    SoCal1 and ShineKen like this.
  5. taz355

    taz355 F1 Veteran Owner Silver Subscribed

    Joined:
    Feb 18, 2008
    Messages:
    6,059
    Location:
    Indio Ca/ Alberta
    Full Name:
    Grant
    Where’s the pics of the 355 p4 I can’t find them now
     
    taz355, Nov 29, 2023
    #30
  6. Qavion

    Qavion F1 World Champ Silver Subscribed

    Joined:
    Feb 20, 2015
    Messages:
    14,533
    Location:
    Sydney
    Full Name:
    Ian Riddell
    Qavion, Nov 29, 2023
    #31
  7. 355 P4

    355 P4 Karting

    Joined:
    Oct 13, 2020
    Messages:
    135
    Location:
    So. California
    Full Name:
    Bill Krueger
    355 P4, Nov 29, 2023
    #32
    tres55 and Qavion like this.
  8. taz355

    taz355 F1 Veteran Owner Silver Subscribed

    Joined:
    Feb 18, 2008
    Messages:
    6,059
    Location:
    Indio Ca/ Alberta
    Full Name:
    Grant
    I think he needs to start a thread for his car looks like an interesting project
     
    taz355, Nov 29, 2023
    #33
  9. taz355

    taz355 F1 Veteran Owner Silver Subscribed

    Joined:
    Feb 18, 2008
    Messages:
    6,059
    Location:
    Indio Ca/ Alberta
    Full Name:
    Grant
    Nice
    Thanks
    Looks like a pretty clean cop setup
    I like the way it’s mounted
     
    taz355, Nov 29, 2023
    #34
  10. SoCal1

    SoCal1 F1 Veteran Owner

    Joined:
    Jun 14, 2011
    Messages:
    8,636
    Location:
    SoCal LA/OC/New Mexico
    Full Name:
    Tim Dee
    Dang I need to finish this project and stop buying more cars
     
    SoCal1, Dec 4, 2023
    #35
Page 2 of 2

Share This Page