Can’t make self learning car won’t start. | FerrariChat

Can’t make self learning car won’t start.

Discussion in 'Maserati' started by ahmeddmahe, Dec 1, 2023.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

Tags:
  1. ahmeddmahe

    ahmeddmahe Rookie

    Joined:
    May 3, 2023
    Messages:
    2
    Full Name:
    F1 gts
    Hello guys ,
    I have Maserati gts same as 430 so
    I have changed
    (Acutator ,Tcu gear box ,F1 clutch position sensor, new battery,new parking brake switch,new pedal brake switch,F1 pump relay)

    1- The car doesn't want to be in neutral ,can’t make self learning

    2-Self-calibration fast GEAR change NoT
    carried out-Invalid signal

    3- oil pressure for the clutch sensor is (0)

    4-parking brake switch lighting turns on and off.

    Note: I hear the actuator is working and I can change the gears from the tool device but Nothing appears in the dashboard except 2 times appeared (N) but didn’t stay for a sec .when I make self learning didn’t complete and written Done!

    any recommendations!
    Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
     
    ahmeddmahe, Dec 1, 2023
    #1
  2. NeuroBeaker

    NeuroBeaker Advising Moderator Moderator

    Joined:
    Oct 1, 2008
    Messages:
    40,245
    Location:
    Huntsville, AL., USA
    Full Name:
    Andrew
    Welcome! I moved your post to the Maserati section. I hope someone will be able to offer some suggestions soon.

    All the best,
    Andrew.
     
    NeuroBeaker, Dec 1, 2023
    #2
    ahmeddmahe likes this.

Share This Page