The elusive 355 challenge wing | FerrariChat

The elusive 355 challenge wing

Discussion in '348/355' started by Redlyne_mr2, May 5, 2023.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Redlyne_mr2

    Redlyne_mr2 Formula Junior

    Aug 5, 2009
    466
    Calgary, Alberta
    Full Name:
    Ryan D
    So I reached out to Eurospares and they can get me 85% of the parts except for the actual carbon deck lid and left had winglet. Does anyone have a lead on a challenge spoiler?

    thanks
    Ryan
     
  2. ShineKen

    ShineKen F1 World Champ
    Silver Subscribed

    Aug 3, 2007
    19,695
    Southern California
    Full Name:
    Nostradamus
    What do you mean by actual carbon deck lid? That’s like 85% of the wing :).

    There’s only one way. Through me :)
     
  3. jagged155

    jagged155 Karting

    Dec 3, 2016
    132
    Scottsdale, Arizona
    Full Name:
    Dan
    Could you share parts/#’s that Eurospares has available? I was looking into the suspension and have come up short.
     
  4. ChoonHound

    ChoonHound Formula 3
    Silver Subscribed

    May 13, 2022
    2,149
    Saint Michaels, MD
    Full Name:
    Lucas
    The carbon pieces probably wouldn’t be hard to have replicated. Especially the end plates
     
    Wsmatau likes this.
  5. Redlyne_mr2

    Redlyne_mr2 Formula Junior

    Aug 5, 2009
    466
    Calgary, Alberta
    Full Name:
    Ryan D
    Mind sending me your email?
     
  6. ShineKen

    ShineKen F1 World Champ
    Silver Subscribed

    Aug 3, 2007
    19,695
    Southern California
    Full Name:
    Nostradamus
    The challenge rear spoiler (complete) has been discontinued for probably 2 decades. You can buy it in pieces, but it’s incomplete.

    If one a really serious, I should see a pm. There’s really no other way. I have the full wing and every piece of the full wing as extras.
     
    ernie and carguyjohn350 like this.
  7. ShineKen

    ShineKen F1 World Champ
    Silver Subscribed

    Aug 3, 2007
    19,695
    Southern California
    Full Name:
    Nostradamus
    Will most likely bought the last of the pieces.
     
  8. ShineKen

    ShineKen F1 World Champ
    Silver Subscribed

    Aug 3, 2007
    19,695
    Southern California
    Full Name:
    Nostradamus
    The plates are curved and double sided. Not flat and single sided.
     
  9. Redlyne_mr2

    Redlyne_mr2 Formula Junior

    Aug 5, 2009
    466
    Calgary, Alberta
    Full Name:
    Ryan D
    Thats a challenge wing Tim?
     
  10. timeckart

    timeckart Formula Junior

    Apr 9, 2015
    558
    Wildeck in Germany
    Full Name:
    Tim Eckart
    carguyjohn350 likes this.
  11. bryanchin

    bryanchin Karting

    Jul 7, 2016
    82
    Malaysia
    Full Name:
    Bryan Chin
    i coudlnt find one... so i designed and fabricated one for my own... a subtle 'duck tail' for the 355
     

    Attached Files:

  12. CCWillF355

    CCWillF355 Karting

    Nov 14, 2019
    110
    London
    Full Name:
    Chris Williams
    Wsmatau, 308 GTB and nismodrifter like this.
  13. CCWillF355

    CCWillF355 Karting

    Nov 14, 2019
    110
    London
    Full Name:
    Chris Williams
  14. Redlyne_mr2

    Redlyne_mr2 Formula Junior

    Aug 5, 2009
    466
    Calgary, Alberta
    Full Name:
    Ryan D
    Ya your car is super sick! Have a lead on a wing potentially, fingers crossed.
     
  15. CCWillF355

    CCWillF355 Karting

    Nov 14, 2019
    110
    London
    Full Name:
    Chris Williams
    let me know how you get on, I’m considering to remanufacture them.
     
  16. ShineKen

    ShineKen F1 World Champ
    Silver Subscribed

    Aug 3, 2007
    19,695
    Southern California
    Full Name:
    Nostradamus
  17. Redlyne_mr2

    Redlyne_mr2 Formula Junior

    Aug 5, 2009
    466
    Calgary, Alberta
    Full Name:
    Ryan D
    Great news, located a wing but now I need the engine lid brackets and underbracing. I was told to check out superformance but they only offer the bracket, not the underbracing. Being located in Canada where should I look to order the underbracing parts? Im assuming the local dealer might be my best bet?
     
  18. kenneyd

    kenneyd Formula 3

    Sep 30, 2014
    2,008
    NE FL
    Full Name:
    Ken
    I bought the brackets from superformance and the all the OEM underbraces/bits from eurospares.
     
  19. CCWillF355

    CCWillF355 Karting

    Nov 14, 2019
    110
    London
    Full Name:
    Chris Williams
    Same here Superformace and Eurospares, I have an OEM right winglet and have mould to create both the right and left winglet. Let me know how you get on.
     
  20. Redlyne_mr2

    Redlyne_mr2 Formula Junior

    Aug 5, 2009
    466
    Calgary, Alberta
    Full Name:
    Ryan D
    Excited about this!
     
  21. 027fury

    027fury Rookie

    Jun 19, 2019
    6
    Full Name:
    KungPaoPhooey
    howdy folks, apologies for reviving this thread - but anyone have any updated leads on a factory 355 Challenge spoiler? Clearly I am also new to the site, so I'm unsure how to DM some of the users like ShineKen to see if they have any to part with. Do let me know!
     
  22. deuce49

    deuce49 Karting

    Sep 25, 2011
    141
    Scottsdale
    Full Name:
    BC
  23. ShineKen

    ShineKen F1 World Champ
    Silver Subscribed

    Aug 3, 2007
    19,695
    Southern California
    Full Name:
    Nostradamus
    I feel like I have, but not sure. I can weigh it.
     
    deuce49 likes this.

Share This Page