First Track Day in the F355: Impressions | Page 2 | FerrariChat
Buy

First Track Day in the F355: Impressions

Discussion in '348/355' started by MK355, Jun 10, 2024.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

Page 2 of 2
  1. MK355

    MK355 Karting
    Silver Subscribed

    Jul 19, 2022
    176
    Full Name:
    M K
    #26 MK355, Jun 13, 2024
    The B-G Racing Spacer is PCD so should work, correct?

    "Multi-drilled for both 6x70mm and 6x74mm PCD bolt patterns to accommodate the majority of aftermarket steering wheels, enabling cross compatibility between hub kits and steering wheels with either 6x70mm or 6x74mm PCD patterns."
     
  2. ShineKen

    ShineKen Two Time F1 World Champ
    Silver Subscribed

    Aug 3, 2007
    20,036
    Southern California
    Full Name:
    Nostradamus
    #27 ShineKen, Jun 13, 2024
    Last edited: Jun 13, 2024
    That works for the PCD to the Momo steering wheel. The PCD on the car side is unique to the 355.

    The B-G setup looks like an extension to an adapter. You want something that is an adapter and extension at the same time. Just makes things easier.
     
  3. ShineKen

    ShineKen Two Time F1 World Champ
    Silver Subscribed

    Aug 3, 2007
    20,036
    Southern California
    Full Name:
    Nostradamus
    #28 ShineKen, Jun 13, 2024
    355 is a 4 bolt adapter. Don’t know what the PCD is, but unlikely an adapter will work unless specified it will work with a 355.
    Image Unavailable, Please Login
     
    MK355 likes this.
  4. bobzdar

    bobzdar F1 Veteran

    Sep 22, 2008
    6,919
    Richmond
    Full Name:
    Pete
    #29 bobzdar, Jun 13, 2024
    What's the hole spacing on the 355 (4 hole)? I think it might work without another adapter if you don't mind it being not perfectly centered (which won't be noticeable if offset vertically).
     
Page 2 of 2

Share This Page