246 GTS vent windows vs. GT vent windows - dimensions? | FerrariChat

246 GTS vent windows vs. GT vent windows - dimensions?

Discussion in '206/246' started by dinogts, Aug 9, 2024.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. dinogts

    dinogts Formula 3
    Owner Rossa Subscribed

    I have located a set of supposedly NOS vent/wing windows for a GTS, but I can't tell if they are for a Dino gts or not. I only have photos of them at this time. I think the GTS vent/wing windows are smaller than the ones on a GT. I would appreciate it if someone would please post the dimensions for a GTS window, either the glass itself or the glass with the trim.

    I looked through the factory Dino parts book, but while I found the vent windows in the parts book, I couldn't find the dimensions, and I didn't find any dimensions the Compendium either, I want to make sure that ones I found are really Dino 246 vent/wing windows, rather than something for an Opel GT or something.
     
  2. dinogts

    dinogts Formula 3
    Owner Rossa Subscribed

    All I need is for someone to measure the length of the sides of the right triangle and the length of the hypotenuse of a 1972 (or later) GT vent window, and someone to measure a GTS vent window for comparison.

    Thanks in advance!
     
  3. celestialcoop

    celestialcoop Formula Junior
    Silver Subscribed

    Mar 20, 2006
    715
    Full Name:
    Coop
    #3 celestialcoop, Aug 10, 2024
    Last edited: Aug 10, 2024
    Image Unavailable, Please Login Image Unavailable, Please Login
    Hi,
    11.75” H (aft edge of window) x 12” W (along bottom of frame) x 18” Hypotenuse. I measured from tip of frame to center of its radius for hypotenuse & bottom dimensions.
    I included a pic of window etching.
    Late ‘72 Euro GT.
    Cheers,
    Coop
     
    dinogts likes this.
  4. dinogts

    dinogts Formula 3
    Owner Rossa Subscribed

    Thank you!
     

Share This Page