[ATTACH]
Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
Hi All, new owner here! Have owned many Porsche’s but finally picked up a 355! Located out of Seattle, WA. Cheers.
Today I took pictures of a 355, but not mine this time: Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Gorgeous color.
Just finished up at an FCA-Desert Region board meeting at Scottsdale Ferrari this morning only to find a European market 1996 355 GTS at the back of the showroom. I’m a 348 owner but was intrigued as the dealer doesn’t often market older pre-owned Ferraris. I was surprised to find this example had the ultra rare carbon fibre seats. At 32k kilometers the overall condition was exceptional. Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
Had a minor coolant leak from a loose hose addressed this week and was in good company when picking up the car today… Image Unavailable, Please Login I was sweating all week but I’m only out $214!
Your car was indeed in good company! You got off easy on that repair bill. One of the benefits of having a Challenge car is that a thorough tech inspection and servicing is performed prior to each track event. It might be said that my car is "over-serviced" but it's necessary where the car is subject to driving extremes. Despite such care, tracks like Sebring with its rough surfaces can take its toll on my Challenge car... Image Unavailable, Please Login A few years ago, the ABS warning light came on while I was on the track. When I pitted in, my right rear ABS sensor had detached and was trailing my car. It was another item that had to be included in tech inspection.
Just picked up one of our daughters from a cooking class and it started snowing… Image Unavailable, Please Login Image Unavailable, Please Login
Brand new Pilot 4S. Crawled home the 1.2 miles… Typically won’t drive on the below 45-50 degrees for obvious reasons.
Need a recommendation for a Carbon Fiber Gauge Cluster Overlay. Which vendor has this item? I've attempted to contact Valence USA, but no response via email and phone number does not seem to work. Thanks for any help on this!
