Rent Scan Tool

Buy the thinkdiag2 with coupon it is 130 dollars ..pair it with an old android to get all the features of the x431 .. same software

 

Will the Thinkdiag 2 pair with iPhone? I just ordered one. I seem to have a collection of these various code readers now but am hoping this will be the last one.

 

It does but the support is limited and some functions are not available on the Iphone - e.g. diff system

 

Is there a PID list for Ferrari applications?

 

There isn't a PID list for the thinkdiag or the launch but the coverage list of what is covered below

We can probably can the until connected and print out samples of the reports

What are looking for

Also autoengineuity has screen shots with the PID..it will give you an idea of what are some of the PID that may be covered by launch/thinkdiag2...we can confirm any you may want

https://www.autoenginuity.com/products/oe-level-coverage/ei18-enhanced-ferrari-and-maserati-expansion/

https://qcar.x431.com/qcar/#/mobile/detail?series=1&car_type=2&soft_name=Ferrari&package_id=FERRARI&ver=11.40

 

Looking for things like fuel trim, injector duration, O2 Sensor voltage, cat temp, ECT, IAT, etc.

 

Are you looking to just read this data or have bi-directional communication with car

The reason I ask is because the ap200 does a great job of reading the data off the ecu's.. it's free from one vehicle for life and it's very cheap 50 bucks

Autel MaxiAP AP200 OBD2 Scanner Bluetooth Wireless OBDII Auto Diagnostic Tool with Full System Diagnostic, 19 Reset Functions, AutoVIN, Check Engine Light Code Reader for iPhone Android White&Gray https://a.co/d/iqQ3KkV

 

Don’t need bi-directional. Autel told me I have to buy a bi-directional model to get all the Ferrari PIDs.

 

This is a older model and I believe it covers most if not all .

What model Ferrari are looking for

 

Here is the PID from the thinkdiag2 and I believe the autel ap200 has them all as well
Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login

 

That was for 2008 430

 

Some from Autel Ap200 just of ecu
Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login

 

Can you PM (or email) me the PDFs?

What is the cost of the ap200? Can you provide a link for details on this model?

Thanks.

 

Most of the documents I have are on paper/ or screenshots but sure i can email them to you if you want - but the unit is 55-60 dollars and I think you will be happy - you can get from amazon and if does not work for you .. you can always return it
What vehicle are we speaking about to work on ?

https://www.amazon.com/Autel-AP200-Bluetooth-Professional-Automotive/dp/B07QD4GZW4/ref=asc_df_B07QD4GZW4?mcid=2bffc5fbbf9a33d2af4330a23c86fa08&hvocijid=6769014908306254245-B07QD4GZW4-&hvexpln=73&tag=hyprod-20&linkCode=df0&hvadid=721245378154&hvpos=&hvnetw=g&hvrand=6769014908306254245&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9003674&hvtargid=pla-2281435180458&psc=1

 

Ok, no need to send email; I’ll return if it doesn’t work well for me.

I’m working on a 2001 360 Modena.

Thanks.

 

Ok then the ap200 will even be better than all the launch products for the TCU if original and not the CS

You will be surprised how much you get for that small amount of money

 

Two more questions:

Does it allow me to choose the 2001 360 Modena from the menu of cars?

Also, in what format can one save a report?

Thanks again.

 

It will try to scan your vin automatically and then if that fails you can select Ferrari and then 360

PDF is the report it can generate

 

Got it.

 

Going to try the AP200.

What was the other scanner you recommended for my 2001 Modena?

As I mentioned, I don’t need bi-directional capability, but if I wanted to have something that comes with a screen, what would you recommend?

Whatever I buy, I’d like to be able to return it, like the AP200.

Thank you.

 

Since you have a 2001 TCU you going to have to stay within the autel line or the otofix line
You can search for either one of those and pick what you like ..screen size , price etc ..since you only need read capabilities

But the cheapest route is to buy a android table (any size you want) ..just make sure it is compatible with ap200 ..and have it work like that

The full size tablet type scan tools from Autel will most likely be more than that and have a subscription as well

If you like to discuss in more detail I can offline ..PM me

 

Thanks, great idea.

BTW: Would an iPad work as well?

 

I haven't tested it in iPhone or i stuff but based on some tools I have used work better with Android

 

So the AP200 will.communicate with the early 360 TCU?