Do 348s have a tow hook hole cover from factory? If so, is there a part number please? I’ve been unable to find one. My new to me car had a tow hook (non original) mounted which I’ve now removed and would like to cover the hole. (Front tow hook)
You should check the front bumper diagram, it should be there somewhere. But, as far as I know, it is just a simple flat black rubber plug so a universal automotive body plug of suitable diameter will do.
Does anyone know the reference of the 12 o-rings that the flywheel and the large gasket have? I have searched and can't find anything
Hi all, new here…. Just picked up 94’ 348 Spider. Does anyone have a complete tool kit? Mine is missing 2 items in the pre molded trays, wondering what goes in them? Photos of such? Image Unavailable, Please Login Image Unavailable, Please Login
Greetings Friend, Please see attached are photos from my 348ts-tool kit. It looks like more light bulbs, and a spark plug socket that are missing. Cheers! Image Unavailable, Please Login Image Unavailable, Please Login
I will check mine when I get home, definitely one light and the spark plug socket, but not sure if that 3rd one is a light as well as that one in your picture doesn't seem to fit the spot it goes in.
Does anyone know what that is for? It looks like it has a light bulb inside Image Unavailable, Please Login
Yes, back on the tool kit question…. No one seems to know what goes/came in that fitted opening where the small light bulb is pictured? Rectangle shaped with the round indent deeper on one end. Also, can someone confirm the spark plug socket size? (Odds of finding a matching Kraftwerk one seem pretty low but somehow it makes me feel better to not have the space empty ). Finally, the leather straps in my (f)trunk were removed…. I have sourced replacements but am not sure of attachment location and method? (Firewall or front wall? Rivets?). Photos would be a big help! Thx in advance.
You can buy the spark plug socket from Maranello (and its in stock too!). https://www.ferrariparts.co.uk/Diagram/Ferrari/348-tb-ts/044A-Equipment-Vertical-Bag Image Unavailable, Please Login
photos of different cars on the internet... Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
Hi guys, is there any cross reference for the fuel pressure regulator of a gts? I think it's a 3.8 bar model right?
This is the info I found. See what Bosch number you currently have and look for the shown equivalents (I cannot comment on their quality/reliability). Image Unavailable, Please Login
Does anyone knows where I could find these 2 parts? Sold out at Ferrair & Eurospares .... 62153300 RH inner gasket 62153400 LH inner gasket Many thanks ChrisEnzo from Austria Image Unavailable, Please Login
i did not uninstall my original pressure regulator yet and have access to only a part of the reference but it seems ending with '372'. Quite strange...
You may have looked at the batch or something number. Look for the number next to the Bosch logo, starting with 0 280 .., top of the two numbers seen on the picture (if your current FPRs are Bosch). Image Unavailable, Please Login
The door panel “Christmas (or for!) Tree” nylon clips on my 348 had lost their barbs, and weren’t holding the panel to the door frame any longer. Found identicals at Carclips.co.nz part# CC11292 (for Citroen/Peugeot). Cheers. Image Unavailable, Please Login
Oh, that's so disappointing! I called them today and they said that new stock will arrive in two months (). But, on the positive side, I found I have 6 clips left from the stock I bought recently, and I'm happy to send them to you (for the cost of postage), if you wish? PM me. Cheers Colin But I am puzzled.... the door frame has 4 holes, presumably to accept 4 of these Xmas Tree style clips. But my panels only have 3 clips, and no provision for a clip of any kind to go into the 4th hole (at the outer edge of the door frame). Instead, a narrow beading runs down the edge of the door, with self-tappers through the beading, the panel, and into the frame. Seems kinda rude? Anybody have a clip fixed on the panel (Araldite maybe?), utilising the 4 hole as intended? Image Unavailable, Please Login
