More help requested with small interior fixes - door screws and horn button | FerrariChat
Buy

More help requested with small interior fixes - door screws and horn button

Discussion in 'Mondial' started by davemqv, Apr 22, 2025.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. davemqv

    davemqv F1 Rookie

    Aug 28, 2014
    3,153
    USA
    Full Name:
    Dave
    #1 davemqv, Apr 22, 2025
    Hi All

    I am still rehabilitating my interior a bit and have two questions for the group.

    Horn button - it is quite loose and pops out if I hit a good bump in the road. Unlike the older 308 horn buttons, I don't see any metal tabs I can bend out. Is there a way to re-secure the original horn button or do I have to replace it?

    Also, does anyone know what size screw secures the lower fabric "maquette" section of the interior door panel (number 10 in the attached drawing)? I can't find the screw on the parts schematic.

    Thanks for any help.


    Image Unavailable, Please Login
     
  2. 350HPMondial

    350HPMondial F1 Veteran
    Silver Subscribed

    Feb 1, 2002
    5,292
    18 mi from the surf,, close to Pismo, CA
    Full Name:
    Edwardo
    #2 350HPMondial, Apr 23, 2025
    Just a suggestion,, works on my momo button, maybe not on a personal wheel.

    Use the smallest of small dabs.
    9 o’clock and 3,,
    caution, Don’t use any other kind,, or any other 3M number. 08011 only.
    ( rubber cement glues turn to cement )
    Image Unavailable, Please Login
     
  3. davemqv

    davemqv F1 Rookie

    Aug 28, 2014
    3,153
    USA
    Full Name:
    Dave
    #3 davemqv, Apr 23, 2025
    Thanks, that's a good idea. I had considered something like that, but was concerned it might be too permanent. What if you need get into your steering wheel for some reason? Will this let go with a bit of pressure?
     
  4. 350HPMondial

    350HPMondial F1 Veteran
    Silver Subscribed

    Feb 1, 2002
    5,292
    18 mi from the surf,, close to Pismo, CA
    Full Name:
    Edwardo
    #4 350HPMondial, Apr 23, 2025
    Yes, it’s polyurethane.. always will peel off. ( but, not on new paint. )
    ,,
    ask me how I know.
    :)
     
    davemqv likes this.
  5. 350HPMondial

    350HPMondial F1 Veteran
    Silver Subscribed

    Feb 1, 2002
    5,292
    18 mi from the surf,, close to Pismo, CA
    Full Name:
    Edwardo
    #5 350HPMondial, Apr 23, 2025
    Image Unavailable, Please Login
    ,,
    My horn works good.
    but, it is the wrong horn button.
    ( a momo , in a personal steering wheel..)
    ,, later on, I did find a New In Ferrari Box, Personal Horn Button.

    if interested
    ,,
    PM
    Me.
     
    davemqv likes this.
  6. davemqv

    davemqv F1 Rookie

    Aug 28, 2014
    3,153
    USA
    Full Name:
    Dave
    #6 davemqv, Apr 23, 2025
    Great I will try a few dabs of that. Thanks!

    I think I sorted out the screws as well. #8 x 1 inch. Black oxide SEMS with black washers. Hard to find OEM but I think I've found some that are nearly identical. We shall see!
     
    moysiuan and 350HPMondial like this.
  7. dm_n_stuff

    dm_n_stuff Four Time F1 World Champ
    Lifetime Rossa Owner

    Dec 10, 2003
    43,516
    26.806311,-81.755805
    #7 dm_n_stuff, Apr 23, 2025
    Try newcoproducts.com

    Got a lot of correct stuff for restorations, in the nuts, bolts and screws department. Used a bunch of their stuff when we refurbished my Dino, many moons ago, and they're still at it.

    D
     
    davemqv likes this.
  8. davemqv

    davemqv F1 Rookie

    Aug 28, 2014
    3,153
    USA
    Full Name:
    Dave
    #8 davemqv, Apr 23, 2025
    will do, thanks!
     
    350HPMondial likes this.

Share This Page