For Sale Extremely Rare Original Hamann PG3 Rear Wheels for the 355 and 512TR

It is will a heavy heart I need to downsize some of my parts collection. The short version is I saw this 355 photo decades ago...Immediately I knew I wanted to recreate it but with a 512TR. Little did I realize how rare in this spec they were. All data I have suggest that there are under 5 sets in the US (only 3 verified).

Image Unavailable, Please Login
Image Unavailable, Please Login

They are 11in wide ET66 and are a direct fit (NO spacers/adaptors/etc) for the 355 and 512TR. I had planned to use them on my 512TR but first need to complete a rather extensive major and fuel system redux.

$3850 OBO including custom Ferrari center caps x4. 295 wide Nitto tires included mostly to make shipping easier.

(I also have custom Hamann fronts I had rebarrelled (8.5in ET42) to work on the front of a 355/512TR if you want a full set)

 

Yes they are OE OZ / made in Italy with forged barrel/lips. Much much stronger then the OEM BBS 2piece wheels and about on par with the OEM speedline 3 peice wheels (albeit at a lighter weight).

 

Are you asking about the centers? Yes they have OZ markings on the wheel centers. They are also stamped OZ on the barrels and include the factory lip/barrel spec (which I used to reverse engineer the front wheels). Naturally they also use a variant OZ center cap too. Select versions also have OZ stickers on the lips (I dont think these do, but I could have swore at least one pair of Hamanns in my collection do have them).

OZ was contracted by Hamann to make most of their PG series of wheels. I dont know about the later 2000s era and onward wheels but their 90s ane early 2000s were all OZ.

PS happy to take as many photos of whatever for an interested party. I would rather not pull out of my garage until I do though. I have been around fchat (and am an exMod) for decades now so well established/known seller here.

More photos: https://www.ferrarichat.com/forum/threads/19in-wheels-on-a-512tr-sacrilege.703581/#post-150021737

 

Please my friend, no offense taken or implied. I am in the same boat as you - I find the nitty gritty to be fascinating.

As mentioned when I have a buyer who is looking for particular photos I will go get many more photos. The garage is cold right now as we have had a bad winter this year so all the cars and parts are hibernating still.

 

I should add I am open to partial trade for a rear 19in NF2 wheel (12.5in ET51 / 5x108 / 19in rear) as I need a single wheel for a project.

More photos on a 355:

 

As I had several messages ask:

Yes I have a pair of fronts available as well. I had a set custom barreled with forged lips/inners explicitly in the 355 filament at 19x8.5in wide ET42. They were made for a separate project but if someone wants a full set, I am happy to sell together. Alternatively if you want to rebuild your own I am happy to share the technical details so you can decide whatever front works best for you.

Also sale includes Ferrari horse/yellow center caps. I can include Hamann original caps if so desired.

 

They weigh less than my OEM 19in modular wheels (actually closer to my factory 18in Al wheels)