Sign in or Sign up

Your Profile Page
Contact Details
Privacy
Preferences
Alert Preferences
Password
Log Out
Show online status
Messages:0
Likes:0
Points:0

Conversations

Alerts

More from Driven Lifestyle Group

© 2025 DRIVEN LIFESTYLE. All rights reserved.

Bulletproof Automotive : Kline Innovation exhaust systems for the 360, F430, and F430 Scuderia

Discussion in '360/430' started by Bulletproof Automotive, Mar 12, 2024.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

Bulletproof Automotive Karting
Sponsor

Jan 29, 2024

201

Los Angeles
#1 Bulletproof Automotive, Mar 12, 2024
Bulletproof Automotive : Kline Innovation exhaust systems for the 360, F430, and F430 Scuderia

At Bulletproof Automotive, we are a top tier premium dealer for the spectacular Kline Innovations exhaust products. Design, quality, sound, and performance are second to none. I've listed all information below including thorough details in each of the quote boxes. We offer exclusive pricing for all Ferrarichat members. All pricing listed in this thread is MSRP. Please contact me directly via PM, email, or phone to receive your Ferrarichat member discount and discuss your purchase. We accept all major credit cards, PayPal, Zelle, wire transfer, and we offer financing via Affirm. Thank you!

-James
[email protected]
213.212.7649

KLINE VALVETRONIC EXHAUST SYSTEM FOR FERRARI 360

As the successor to the Ferrari 355, the Ferrari 360 embodies the essence of a true driver’s machine. With its flat plane crank V8 engine generating 395 horsepower and an impressive 8500 RPM redline, it delivers exhilarating performance. While the factory exhaust note is satisfactory, there is substantial potential for enhancement, along with the opportunity for compelling weight reduction.

THE SOUND

Through the removal of the heavily chambered rear silencer and the substitution with their lightweight Inconel 625 rear section, the weight of the exhaust is significantly reduced to only one-third of the stock system. Incorporating their signature 1D CLR X pipe design raises the pitch of the exhaust, resulting in the iconic high-pitched F1 scream that enthusiasts crave. When the valve is closed, the exhaust gases are intelligently channeled through their harmonically tuned silencer, delivering a smooth driving experience that closely mirrors the stock setup without any drone on the highway. However, upon opening the valve, the silencer is completely bypassed, allowing the raw power of the X pipe to unleash that exhilarating, high-pitched F1 scream.

In addition, replacing the stock 600cpsi catalysts with their HJS race catalysts or racing pipes further enhances the exhaust sound, producing an aggressive F1-like tone. The available tips come in a choice of double-skinned Inconel or stainless steel, as well as F1-grade pre-preg carbon fiber, providing both durability and style options. Moreover, they offer equal length headers crafted from either Inconel alloy or stainless steel, which not only enhance the overall sound by adding an extra dimension but also deliver moderate performance gains.

PERFORMANCE

To achieve optimal performance gains, the recommended additions include a rear valvetronic exhaust, racing pipes, and equal length headers. This combination is expected to yield a power increase of approximately 21 horsepower across the entire rev range.

STAINLESS STEEL

When it comes to exhaust manufacturing, the prevailing industry standard revolves around the use of 304-grade stainless steel. This particular grade offers a well-rounded combination of moderate strength, thermochemical stability, cost-effectiveness, and ease of production. It enables the construction of exhaust systems that strike a sensible balance between affordability and functionality, ensuring durability over the long term. However, it is worth noting that stainless steel is relatively heavier compared to alternative materials. Although it shares a similar density with regular steel, it has slightly lower tensile strength. This limitation restricts the potential for creating high-performance exhaust components using stainless steel. Moreover, in terms of sound characteristics, the thicker sidewalls required by stainless steel may result in a somewhat subdued and less vibrant exhaust note compared to other materials mentioned.

INCONEL

When it comes to ensuring durability and heat resistance in the aerospace industry, the utilization of Inconel 625 stands as a paramount choice. This extraordinary material finds extensive applications in the manufacturing of critical components, specifically exhaust turbine blades for high-performance jet engines. Notably, Inconel is the preferred selection for Formula One exhaust systems and has been chosen by manufacturers involved in prestigious hypercar projects like the McLaren P1 and Aston Martin 177. These applications benefit immensely from Inconel’s exceptional capacity to withstand extreme temperatures surpassing 1000°C while prioritizing a lightweight design.

Inconel exhibits extraordinary properties, including remarkably high tensile strength and exceptional thermochemical stability. Its tensile strength is comparable to that of titanium, resulting in an outstanding strength-to-weight ratio. As a result, Inconel allows for the utilization of thin sidewall materials while maintaining structural integrity, facilitating the production of lightweight components that demonstrate remarkable resistance to fatigue over extended periods. However, working with Inconel presents certain challenges due to its difficult machinability and specific welding requirements, necessitating specialized skills and time-consuming techniques. Additionally, the unique properties and specialized manufacturing processes associated with Inconel contribute to its higher cost as a raw material.

HEAT SHIELD

For those who prioritize heat management, the company offers a thoughtfully designed heat protection solution crafted from embossed stainless steel sheet. Each heat shield is meticulously created and welded by skilled artisans. By integrating these heat shields onto the manifolds, customers can experience reduced heat soak and improved scavenge, resulting in enhanced overall performance and a cooler engine temperature.

THE SPECIFICS

Available with either 100 cell, 200 cell or racing pipes for optimum performance.

All cross section chosen for the optimum balance of torque and power.

Rear silencer section.

X-Pipe Diameter – 63.5mm

Silencer Transit – 50mm

Catalyst Pipe Diameter – 70mm / 63.5mm

Catalyst Overall Cross Section – 122mm

Manifold – 45mm (primaries) / 63.5mm (secondaries)

MATERIALS

304 Grade Stainless

F1 Grade Inconel 625 Superalloy

100 Cell Catalysts Pipes – 304 Grade Stainless / F1 Grade Inconel 625 Superalloy

Racing Pipes – 304 Grade Stainless / F1 Grade Inconel 625 Superalloy

Manifolds – 304 Grade Stainless / F1 Grade Inconel 625 Superalloy

Click to expand...

Ferrari 360 Valvetronic System - Stainless Steel : $4528 / Inconel 625 : $7418

Ferrari 360 100 cell Cat Pipe Set - Stainless Steel : $2916 / Inconel 625 : $3834

Ferrari 360 200 cell Cat Pipe Set - Stainless Steel : $2992 / Inconel 625 : $3910

Ferrari 360 Decat Pipe Set - Stainless Steel : $1438 / Inconel 625 : $2473

Ferrari 360 Catalyst Heat Shield Option : $600

Ferrari 360 Manifolds - Stainless Steel : $4184 / Inconel 625 : $6498

Ferrari 360 Manifolds Heat Shield Option : $1200

Ferrari 360 Wireless Button Kit : $569

Image Unavailable, Please Login
Image Unavailable, Please Login
Image Unavailable, Please Login
Image Unavailable, Please Login

KLINE VALVETRONIC EXHAUST SYSTEM FOR FERRARI F430

The Ferrari F430, renowned for its captivating aesthetics, single plane crank V8 engine, and impressive 8500 rpm redline, stands as a true driver’s machine. At Kline, the decision was made to develop the ultimate exhaust system for the F430. The objective was simple: to create an exhaust that delivered unparalleled performance, sound, and weight savings, utilizing the best available options.

THE SOUND

Starting from the initial stages, the upgrades to the exhaust system were carefully considered. The first improvement involved replacing the stock catalysts with high-performance 100cpsi race catalysts. This modification resulted in a reduction in the gas drag coefficient, improved scavenging, and ultimately enhanced torque response and peak power figures. To further enhance the exhaust system, the heavy and cumbersome factory silencer was replaced with their harmonically tuned ultra-lightweight Inconel 625 silencer. This modification not only enriched both bass and treble frequencies but also significantly reduced weight.

The final and crucial design feature, exclusive to Kline, is their trademark tight radius laminar flow X-pipe. The resulting sound from this design is exceptionally smooth during light driving conditions, transforming into a howling, raucous high-pitched incendiary vocal when desired. Under low revs (valve closure), the gases pass through an acoustically tuned silencer with cross sections optimized to reach the ideal gas velocity for maximum torque. Under high loads and high revs, the valves open to unleash optimum power, accompanied by an unhindered F1-like scream. The exhaust tips are available in either Double-Skinned Mitre Cut or F1 Grade Pre-Preg Carbon Fiber options.

STAINLESS STEEL

In the domain of exhaust manufacturing, the prevailing industry standard revolves around the utilization of 304-grade stainless steel. This grade offers a well-rounded combination of moderate strength, thermochemical stability, cost-effectiveness, and ease of production. It enables the construction of exhaust systems that strike a practical balance between affordability and functionality, ensuring long-lasting durability. However, it is important to note that stainless steel is relatively heavier compared to alternative materials. While its density is similar to regular steel, it possesses slightly lower tensile strength. This limitation restricts the potential for creating high-performance exhaust components using stainless steel. Additionally, the thicker sidewalls required by stainless steel may result in a somewhat subdued and less vibrant exhaust note compared to other materials.

INCONEL

Inconel 625 stands as the ultimate choice for ensuring durability and heat resistance in the aerospace industry. This exceptional material finds extensive applications in the manufacturing of critical components, particularly exhaust turbine blades for high-performance jet engines. Inconel is notably favored in Formula One exhaust systems and has been selected by manufacturers involved in prestigious hypercar projects such as the McLaren P1 and Aston Martin 177. These applications greatly benefit from Inconel’s ability to withstand extreme temperatures exceeding 1000°C while prioritizing a lightweight design.

Inconel exhibits remarkable properties, including high tensile strength and excellent thermochemical stability. Its tensile strength is comparable to that of titanium, resulting in an outstanding strength-to-weight ratio. Consequently, Inconel enables the use of thin sidewall materials while maintaining structural integrity, facilitating the production of lightweight components that demonstrate remarkable resistance to fatigue over extended periods. However, working with Inconel poses certain challenges due to its difficult machinability and specific welding requirements, demanding specialized skills and time-consuming techniques. Additionally, the unique properties and specialized manufacturing processes associated with Inconel contribute to its higher cost as a raw material.

CARBON FIBER

Carbon fiber reinforced polymer boasts an extremely high tensile strength-to-weight ratio, surpassing that of all metals. Components with extremely low weight and high tensile strength can be molded into nearly any shape. The company exclusively utilizes aerospace and Formula 1 grade pre-preg carbon fiber, cured in an autoclave at high pressure and temperature, to achieve the lightest and strongest carbon fiber suitable for the most extreme conditions.

HEAT SHIELD

For customers who prioritize effective heat management, the company offers a meticulously designed heat protection solution crafted from embossed stainless steel sheet. Skilled artisans carefully create and weld each heat shield to ensure optimal performance. Integrating these heat shields onto the manifolds allows for reduced heat soak and improved scavenging, resulting in enhanced overall performance and a cooler engine temperature.

THE SPECIFICS

Cross Sections

Catalyst / Racing Section Tubing – Dual 63.5mm OD (chosen for a balance of torque and peak power)
Catalysts, available in 100cpsi 124mm billet, HJS race catalysts, or racing variation for more aggressive sound, and ultimate performance.

Silencer Section Tubing – Dual 63.5mm on Valve Open / Single 50mm on Valve Closed

63.5mm 1D CLR Laminar Flow X-Pipe

Manifolds

Primaries – 45mm

Secondaries – 63.5mm

Formula one grade true merge collectors.

Materials

Full Inconel 625 Formula One Grade Weight
Valvetronic Silencer Section 10kg
Racing Pipes 1.2kg Each
Catalyst Pipes 2.2kg Each

304 Stainless Steel Weight
Valvetronic Silencer Section 19kg
Racing Pipes 3.0kg Each
Catalyst Pipes 4.5 kg Each

Manifolds Weight
Inconel 625 3.4kg Each
304 Stainless Steel 7kg Each

Catalysts

100 cell or 200 cell HJS cats.

Racing pipes are also available for optimum performance, and a more aggressive sound.

Click to expand...

Ferrari F430 Valvetronic System - Stainless Steel : $4528 / Inconel 625 : $7418

Ferrari F430 100 cell Cat Pipe Set - Stainless Steel : $2916 / Inconel 625 : $3834

Ferrari F430 200 cell Cat Pipe Set - Stainless Steel : $2992 / Inconel 625 : $3910

Ferrari F430 Decat Pipe Set - Stainless Steel : $1509 / Inconel 625 : $2473

Ferrari F430 Catalyst Heat Shield Option : $600

Ferrari F430 Manifolds - Stainless Steel : $4184 / Inconel 625 : $6325

Ferrari F430 Manifolds Heat Shield Option : $1200

Ferrari F430 Wireless Button Kit : $569

Image Unavailable, Please Login
Image Unavailable, Please Login
Image Unavailable, Please Login
Image Unavailable, Please Login

KLINE VALVETRONIC EXHAUST SYSTEM FOR FERRARI 430 SCUDERIA

As the successor to the 360 Challenge Stradale, the Ferrari 430 Scuderia introduced remarkable features. With its powerful 4.3-liter V8 engine and impressive 0-100km/h acceleration of 3.6 seconds, it set the standard against which its rivals were measured. When it came to designing the exhaust system for the Scuderia, Kline’s criteria were straightforward: create an ultralightweight exhaust system that would maximize torque and power gains while delivering the ultimate sonic experience.

THE SOUND

At Kline, it was believed that the Factory exhaust for the 430 Scuderia did not adequately showcase the true beauty of this stunning supercar or unlock the full sonic potential of its 4.3-liter V8 engine.

Starting from the drawing board, the first aspect to be upgraded was the replacement of the stock catalysts with high-performance 100cpsi race catalysts. This modification aimed to reduce the gas drag coefficient, improve scavenging, and ultimately enhance torque response and peak power figures. Furthermore, the heavy and cumbersome factory silencer was replaced with a harmonically tuned silencer, resulting in enriched bass and treble frequencies, as well as a significant reduction in weight. One of the most noteworthy design features, exclusive to Kline, was the trademark tight radius laminar flow X-pipe. This innovative addition contributed to an unbelievably smooth sound during light driving conditions, transitioning to a howling raucous high-pitched incendiary vocal when required.

Under low revs (valve closure), the gases were allowed to pass through a chamber and an acoustic ceramic-filled silencer, with cross sections meticulously tuned to achieve optimal gas velocity for maximum torque. Under high load and high revs, the valves opened to unleash optimum power.

To complete the overall look, the Scuderia can be equipped with the Kline Inconel 16M Style Tips, adding the finishing touch of elegance.

STAINLESS STEEL

Within the realm of exhaust manufacturing, the prevailing industry standard revolves around utilizing 304-grade stainless steel. This grade offers a balanced combination of moderate strength, thermochemical stability, cost-effectiveness, and ease of production. It allows for the construction of exhaust systems that strike a sensible balance between affordability and functionality, ensuring long-lasting durability. However, it’s important to acknowledge that stainless steel is relatively heavier when compared to alternative materials. Despite sharing a similar density with regular steel, it possesses slightly lower tensile strength. This limitation curtails the potential for creating high-performance exhaust components using stainless steel. Additionally, in terms of sound characteristics, the thicker sidewalls required by stainless steel may result in a somewhat subdued and less vibrant exhaust note compared to the aforementioned materials.

INCONEL

When it comes to ensuring durability and heat resistance in the aerospace industry, the utilization of Inconel 625 stands out as the ultimate choice. This extraordinary material finds extensive applications in the manufacturing of critical components, particularly exhaust turbine blades for high-performance jet engines. Inconel is notably favored for Formula One exhaust systems and has been selected by manufacturers engaged in prestigious hypercar projects such as the McLaren P1 and Aston Martin 177. These applications greatly benefit from Inconel’s exceptional ability to withstand extreme temperatures exceeding 1000°C while prioritizing a lightweight design.

Inconel exhibits remarkable properties, including remarkably high tensile strength and exceptional thermochemical stability. Its tensile strength is comparable to that of titanium, resulting in an outstanding strength-to-weight ratio. Consequently, Inconel allows for the use of thin sidewall materials while preserving structural integrity, facilitating the production of lightweight components that demonstrate remarkable resistance to fatigue over extended periods. However, working with Inconel poses certain challenges due to its difficult machinability and specific welding requirements, demanding specialized skills and time-consuming techniques. Additionally, the unique properties and specialized manufacturing processes associated with Inconel contribute to its higher cost as a raw material.

HEAT SHIELD

For customers who prioritize effective heat management, the company offers meticulously designed heat protection solutions crafted from embossed stainless steel sheet. Each heat shield is carefully created and welded by skilled artisans to ensure optimal performance. Integrating these heat shields onto the manifolds allows for reduced heat soak and improved scavenging, resulting in enhanced overall performance and a cooler engine temperature.

THE SPECIFICS

Cross Sections

Catalyst / Racing Section Tubing – Dual 63.5mm OD (chosen for a balance of torque and peak power)

Silencer Section Tubing – Dual 63.5mm on Valve Open / Single 50mm on Valve Closed

Catalysts available in 100cpsi 124mm billet, HJS race catalysts, or racing variation for more aggressive sound, and ultimate performance.

63.5mm 1D CLR Laminar Flow X-Pipe

Manifolds

Primaries – 45mm / 63.5mm Post Collector

Formula one grade true merge collectors.

Materials

Full Inconel 625 Formula One Grade Weight
Valvetronic Silencer Section 6kg
Racing Pipes 1.2kg Each
Catalyst Pipes 2.2kg Each
Tips = Nothing!

304 Stainless Steel Weight
Valvetronic Silencer Section 13kg
Racing Pipes 3.0kg
Catalyst Pipes 4.5kg

Click to expand...

Ferrari F430 Scuderia Valvetronic System - Stainless Steel : $4981 / Inconel 625 : $7533

Ferrari F430 Scuderia 100 cell Cat Pipe Set - Stainless Steel : $2916 / Inconel 625 : $3834

Ferrari F430 Scuderia 200 cell Cat Pipe Set - Stainless Steel : $2992 / Inconel 625 : $3910

Ferrari F430 Scuderia Decat Pipe Set - Stainless Steel : $1509 / Inconel 625 : $2473

Ferrari F430 Scuderia Catalyst Heat Shield Option : $600

Ferrari F430 Scuderia Manifolds - Stainless Steel : $4628 / Inconel 625 : $7487

Ferrari F430 Scuderia Manifolds Heat Shield Option : $1250

Ferrari F430 Scuderia Inconel Exhaust Tips : $1265

Ferrari F430 Scuderia Wireless Button Kit : $569

Image Unavailable, Please Login
Image Unavailable, Please Login
Image Unavailable, Please Login
Image Unavailable, Please Login
jtn0514 and collegeboy like this.
Bulletproof Automotive Karting
Sponsor

Jan 29, 2024

201

Los Angeles

#2 Bulletproof Automotive, Apr 9, 2024

All PM's replied to! Hope everyone is having a wonderful week!

-James
Bulletproof Automotive Karting
Sponsor

Jan 29, 2024

201

Los Angeles

#3 Bulletproof Automotive, May 7, 2024

All PM's replied to! Hope everyone is having a wonderful week!

-James
Bulletproof Automotive Karting
Sponsor

Jan 29, 2024

201

Los Angeles

#4 Bulletproof Automotive, Jun 11, 2024

All PM's replied to! Hope everyone is having a wonderful week!

-James
Bulletproof Automotive Karting
Sponsor

Jan 29, 2024

201

Los Angeles

#5 Bulletproof Automotive, Jul 11, 2024

All PM's replied to! Hope everyone is having a wonderful week!

-James
Bulletproof Automotive Karting
Sponsor

Jan 29, 2024

201

Los Angeles

#6 Bulletproof Automotive, Aug 28, 2024

All PM's replied to! Hope everyone is having a wonderful week!

-James

550nitis Formula Junior
Silver Subscribed

Feb 3, 2016

759

Houston

#7 550nitis, Sep 1, 2024

Are the exhaust in stock?
Bulletproof Automotive Karting
Sponsor

Jan 29, 2024

201

Los Angeles

#8 Bulletproof Automotive, Sep 3, 2024

550nitis said: ↑

Are the exhaust in stock?
Click to expand...

Kline exhaust systems are made to order with a typical lead time of roughly 10 weeks from the date of the order. There's also a rush option available that cuts it down to roughly 5 weeks with an additional fee.

-James
Bulletproof Automotive Karting
Sponsor

Jan 29, 2024

201

Los Angeles

#9 Bulletproof Automotive, Oct 10, 2024

All PM's replied to! Hope everyone is having a wonderful week!

-James
Bulletproof Automotive Karting
Sponsor

Jan 29, 2024

201

Los Angeles

#10 Bulletproof Automotive, Oct 15, 2024

All PM's replied to! Hope everyone is having a wonderful week!

-James
Bulletproof Automotive Karting
Sponsor

Jan 29, 2024

201

Los Angeles

#11 Bulletproof Automotive, Nov 19, 2024

All PM's replied to! Hope everyone is having a wonderful week!

-James
collegeboy Formula 3
Silver Subscribed

Aug 25, 2007

1,354

Texas and Kaua’i

Full Name:

Mikey

#12 collegeboy, Nov 20, 2024

Looking forward to getting my Inconel version! Thanks!

Bulletproof Automotive likes this.
Bulletproof Automotive Karting
Sponsor

Jan 29, 2024

201

Los Angeles

#13 Bulletproof Automotive, Jan 15, 2025

All PM's replied to! Hope everyone is having a wonderful week!

-James
collegeboy Formula 3
Silver Subscribed

Aug 25, 2007

1,354

Texas and Kaua’i

Full Name:

Mikey

#14 collegeboy, Jan 15, 2025

I can't recommend this system enough. It is incredible on my CS!
Bulletproof Automotive Karting
Sponsor

Jan 29, 2024

201

Los Angeles

#15 Bulletproof Automotive, Feb 20, 2025

All PM's replied to! Hope everyone is having a wonderful week!

-James
Bulletproof Automotive Karting
Sponsor

Jan 29, 2024

201

Los Angeles

#16 Bulletproof Automotive, Mar 25, 2025

All PM's replied to! Hope everyone is having a wonderful week!

-James
Bulletproof Automotive Karting
Sponsor

Jan 29, 2024

201

Los Angeles

#17 Bulletproof Automotive, May 9, 2025

All PM's replied to! Hope everyone is having a wonderful week!

-James
Bulletproof Automotive Karting
Sponsor

Jan 29, 2024

201

Los Angeles

#18 Bulletproof Automotive, Jun 17, 2025 at 3:30 PM

All PM's replied to! Hope everyone is having a wonderful week!

-James
pong996 Rookie

Nov 11, 2003

22

#19 pong996, Jun 17, 2025 at 5:04 PM

Just placed an order yesterday thru James. Excellent to work with. Now the wait begins
Bulletproof Automotive Karting
Sponsor

Jan 29, 2024

201

Los Angeles

#20 Bulletproof Automotive, Jun 17, 2025 at 5:22 PM

Thank you for bringing your business our way. We greatly appreciate it!

-James
bonehead Karting

Apr 21, 2007

170

TX

Full Name:

Ed

#21 bonehead, Jun 17, 2025 at 6:20 PM

pong996 said: ↑

Just placed an order yesterday thru James. Excellent to work with. Now the wait begins
Click to expand...

Whatcha get?
pong996 Rookie

Nov 11, 2003

22

#22 pong996, Jun 17, 2025 at 8:37 PM

Kline manifolds with heat shield + valved xpipe. SS for both

bonehead likes this.

(You must log in or sign up to post here.)

Share This Page