Replacing Rear Trunk "Ferrari" Letters | FerrariChat
Buy

Replacing Rear Trunk "Ferrari" Letters

Discussion in 'Mondial' started by Tsionic, Jun 5, 2025 at 8:11 AM.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Tsionic

    Tsionic Rookie
    Silver Subscribed

    May 30, 2025
    23
    Chicago, IL
    Full Name:
    Freddie Freeloader
    #1 Tsionic, Jun 5, 2025 at 8:11 AM
    How do I remove and replace the rear chrome letters? Is it a pop in and out tab? Is it adhesive? Screwed in?

    I can't find info on this anywhere. My current is fine but it's a littttttle curved on top, probably from someone drying off the car in the past.
     
  2. theunissenguido

    theunissenguido F1 Rookie
    Owner Silver Subscribed

    Jan 21, 2004
    2,605
    Argent/Brasil
    Full Name:
    Guido
    #2 theunissenguido, Jun 5, 2025 at 9:01 AM
    Tsionic likes this.
  3. Tsionic

    Tsionic Rookie
    Silver Subscribed

    May 30, 2025
    23
    Chicago, IL
    Full Name:
    Freddie Freeloader
    #3 Tsionic, Jun 5, 2025 at 9:10 AM
    OK so will this thing just pop off then if i use a plastic tool? and then the new one will just pop in?
     
  4. theunissenguido

    theunissenguido F1 Rookie
    Owner Silver Subscribed

    Jan 21, 2004
    2,605
    Argent/Brasil
    Full Name:
    Guido
    #4 theunissenguido, Jun 5, 2025 at 11:14 AM
    No, you have to pry the clips of first otherwise you brake the pins of that emblem.
     
  5. Tsionic

    Tsionic Rookie
    Silver Subscribed

    May 30, 2025
    23
    Chicago, IL
    Full Name:
    Freddie Freeloader
    #5 Tsionic, Jun 5, 2025 at 11:29 AM
    ok and is that done from the in
    ok and is that done from the inside of the trunk? How do i pop off the black liner on the inside of the trunk lid? Just pop those platic tabs off with force?
     
  6. theunissenguido

    theunissenguido F1 Rookie
    Owner Silver Subscribed

    Jan 21, 2004
    2,605
    Argent/Brasil
    Full Name:
    Guido
    #6 theunissenguido, Jun 5, 2025 at 12:26 PM
    yes, pop of those black tabs with a plastic tool. You find the clips there...but be careful. Not easy to remove.
     
    Tsionic likes this.
  7. Tsionic

    Tsionic Rookie
    Silver Subscribed

    May 30, 2025
    23
    Chicago, IL
    Full Name:
    Freddie Freeloader
    #7 Tsionic, Jun 5, 2025 at 12:26 PM
    Are there ANY videos online showing how to do this? I can't find anything and the product websites have terrible pictures of these
     
  8. theunissenguido

    theunissenguido F1 Rookie
    Owner Silver Subscribed

    Jan 21, 2004
    2,605
    Argent/Brasil
    Full Name:
    Guido
    #8 theunissenguido, Jun 6, 2025 at 4:02 AM
    Those clips look like this
    [​IMG]
    Put a small screwdriver under the upstanding arms and try "gently" to lever the clip of.
     
    Tsionic likes this.
  9. Oleino

    Oleino Rookie

    Feb 2, 2023
    19
    Finland
    Full Name:
    O. Leino
    #9 Oleino, Jun 6, 2025 at 4:22 AM
    It is also a very good idea to check that no water can leak from the mounting holes to trunk. After installing the text back, put some paper next to the clips and rinse trunk lid with water. I found large rust damages from my trunk floor, on otherwise rustfree car. I'll see if I have some photos once I have access to my computer.
     
  10. Alden

    Alden F1 Rookie
    Rossa Subscribed

    Apr 25, 2010
    3,425
    Central Florida
    #10 Alden, Jun 6, 2025 at 6:16 AM
    @Tsionic
    Please post a pic, I gotta see these "curved" letters!
    Alden
     
    ronfrohock likes this.
  11. Tsionic

    Tsionic Rookie
    Silver Subscribed

    May 30, 2025
    23
    Chicago, IL
    Full Name:
    Freddie Freeloader
    #11 Tsionic, Jun 6, 2025 at 10:07 AM
    Here it is BEFORE I straightened it out. Local Ferrari mechanic down the street from me said this is common during car washes... even hand washes
    Image Unavailable, Please Login
     
  12. Oleino

    Oleino Rookie

    Feb 2, 2023
    19
    Finland
    Full Name:
    O. Leino
    #12 Oleino, Jun 6, 2025 at 1:24 PM
    Here is the trunk lid liner remover.
    Image Unavailable, Please Login
    You need to disconnect the wire on left corner, and the strut bracket. Good idea to open up the engine lid first. If you open the trunk lid too much, the edge of the engine lid may scratch the trunk lid.

    On the other photo you can see the tab from Ferrari letters. The clip Guido posted attaches to it. You will find two of them.
    Image Unavailable, Please Login
    I put some paper under the letters to test if the letters did still leak. Had to put a bit sealant to get it waterproof.
     
    peterp and Tsionic like this.
  13. Tsionic

    Tsionic Rookie
    Silver Subscribed

    May 30, 2025
    23
    Chicago, IL
    Full Name:
    Freddie Freeloader
    #13 Tsionic, Jun 6, 2025 at 1:40 PM
    And so do those black plastic tabs on the liner before getting to this phase just pop out with force? I was thinking of using a butter knige or plastic tool to pop them out. i see the holes for them in your pictures as well from where you had removed them.
     
  14. Alden

    Alden F1 Rookie
    Rossa Subscribed

    Apr 25, 2010
    3,425
    Central Florida
    #14 Alden, Jun 6, 2025 at 2:07 PM
    Wow! Unbelievable that it could be bent that much, but who takes their Ferrari through an automatic car wash anyway? LOL! If some gorilla did that washing the car by hand, well that's just too much to think about.
    As far as tools to remove the tabs, you need to get a bunch of these, leave the butter knives in the kitchen.
    Alden
    Image Unavailable, Please Login
     
    peterp and Tsionic like this.
  15. Tsionic

    Tsionic Rookie
    Silver Subscribed

    May 30, 2025
    23
    Chicago, IL
    Full Name:
    Freddie Freeloader
    #15 Tsionic, Jun 6, 2025 at 2:41 PM
    Got it, will do now!
     

Share This Page