P0933- Hydraulic Pressure | FerrariChat

P0933- Hydraulic Pressure

Discussion in 'Technical Q&A' started by Island Guy, Jun 5, 2025 at 7:35 AM.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Island Guy

    Island Guy Karting

    Feb 20, 2020
    132
    Full Name:
    Island Guy
    Any idea where the hydraulic pressure sensor is on a 2009 California? I suspect inside of the transaxle. Can someone confirm, please
     
  2. windsock

    windsock Formula 3
    Rossa Subscribed

    Nov 29, 2006
    1,140
    I assume you are scanning the gearbox TCU and not something like the ABS system
    There are Three pressure sensors in the California gearbox, System pressure, Even and Odd clutch pressures and yes they are internal and require gearbox disassembly if it is a sensor or internal wiring issue. We replace all three sensors, the temperature sensors and the speed sensors if we go inside the boxes. Along with all gaskets and seals.
     
    Willl likes this.
  3. Island Guy

    Island Guy Karting

    Feb 20, 2020
    132
    Full Name:
    Island Guy
    Thank you. Another low mileage pooched transaxle....
     
  4. windsock

    windsock Formula 3
    Rossa Subscribed

    Nov 29, 2006
    1,140
    Early cars especially california's had issues very early in life and a lot of them were wiring issues inside the box. Loose connectors, improper crimp connections and harnesses that chaffed on sharp edges. it can also be the sensor itself.
     
  5. Island Guy

    Island Guy Karting

    Feb 20, 2020
    132
    Full Name:
    Island Guy
    Seems that even the replacment boxes that Ferrari is still selling have these same issues....
     

Share This Page