355 355 Component speakers project from Scuderia Audio

I had initially though of asking a mod if I could add "and 355" to my "348 Component speakers project from Scuderia Audio" thread, but I realized that posting 348 and 355 posts together would just create confusion.

Here are the initial renderings of the 355 hyper directional tweeter pods. Since the original material is metal, we made the entire 3D printed plastic piece quite a bit thicker except for the front edge (that interfaces with the rubber door gasket).

I will be spending all day next Tuesday designing some hardware to mount high end 6 1/2" speakers in the doors.


Image Unavailable, Please Login

Image Unavailable, Please Login

Image Unavailable, Please Login

 

If the tweeter was installed flush with the face of the decorative triangle, the sound would shoot straight across the car and hit the other tweeter (like the 360/430/488 factory tweeters). At that angle, the stereo imaging is horrible. Angling the tweeters so that the sound hits the occupants right square in the face produces perfect stereo imaging. This is an old IASCA trick (International Sound Competition). The reason the tweeter mounting area is not more recessed like our 360/430 pods is because there is no room behind the surface of the triangles on both the 348 and the 355. Form follows function.

 

I appreciate your input.
In this application, the tweeters take up a good deal of room behind the front surface of the triangle. We do the same thing for the 360/430 triangles where there is also room. With the 348 and 355, there is no room for this. We could use a smaller tweeter, but we don't want to sacrifice performance.

 

Unfortunately, I learned this the hard way with our Ferrari 456 design. If I had a brain cell in my head, I would have double checked the clearance first.

 

Yes.
This same speaker is used in both the 348 and 355 models. We already have OEM style electrical connectors for these cars so you won't have to cut off your stock speaker connectors to hook up the aftermarket replacement speakers. We're the only outfit on the planet that has these connectors. We just need to see if there is clearance for the same sized speaker but with larger magnets.

Image Unavailable, Please Login

 

I made this short video to demonstrate the OEM style connectors we have for the 360 and 430 models, but the connector is exactly the same for the 348 and 355.