Mondial Oil Cooler Fan fixed

Very cool. Logical troubleshooting and a low cost fix. Gotta love that!

 

+!

 

Is the plastic replacement a Bosch Brand as well . If it’s Bosch , what’s the Bosch part no. It’s usually stamped on the top .

Thanks in advance ,

Luigi

 

You could probably pry the original relay apart and file the contacts.

 

To keep it original ?

 

Just going through this process as my oil fan stopped. I’m getting 12V from ignition coil, but not from any of the other connections. Looking for suggestions on how to trace the 12V wire that goes to battery. It looks like two blue wires that just disappear into a loom of wires into the wheel well area…

 

I may sound like a broken record, but get a color wiring diagram from member Afterburner. Example pic.
Alden
Image Unavailable, Please Login

 

Not at all - much appreciated. I actually just downloaded a wiring diagram. It’s black and white but no matter I’m color blind as a bat. Apparently the 12V power comes from a junction behind the left side of the instrument panel, and shares wiring with the wipers. I did notice the wiper fuse was blown, not sure if that’s related. I’ll have a look tomorrow.

 

Sorry about your disability, those black and white drawings are almost impossible to trace and sometimes the resolution isn't that good! Good luck!
Alden