Is there any interchangeable ignition switch for 348? I'd just need the bottom part. Mine was melt and seems it can't be bought separately. Image Unavailable, Please Login
If you get stuck eurospares are listing some - one as low as £120 http://www.eurospares.co.uk/searchResult_one.asp?S=134063&TM=1&TMo=434&TA=1&TB=23676
Thanks for pointing it out! I didn't notice while browsing. Probably some Fiat/Alfa part would fit but since I have no idea which, it might be easiest to just buy that one.
Its not one of these is it? Ignition Switch ? S3 & S4 Spider | Classic Alfa Romeo spare parts and accessories
Great find Jeff........348,355,360,550,575 if I'm not mistaken all have that plastic rotor piece attached to the end of the cylinder lock. I have seen them break and are trashed if shorted out or in a burned car. To be on the safe side check the pigtail(harness) to make sure it corresponds to the main dash wiring harness.
BTW I'm only guessing - DONT know whether it actually does fit - just looked similar so needs checking first
It is definitely worth checking considering the price of it vs ferrari part. All you need is for the plastic rotor to fit into the ferrari barrel that way you keep the original cylinder lock and key and throw the alpha parts away(or sell..lol).
juhani, get the bosch WR1 "hard" start kit too - ive just fitted one to mine and its really improved the starting and also allegedly reduces the load on your ignition switch 348 DIY "Restoration" - Page 122
Thanks for the tip, Jeff! I have noticed that hot starts are not always easy and looking into the matter seems like WR1 kit should help with that as well.
Some years later, same question. I just need the switch with the right switch logic. Image Unavailable, Please Login
