New contender for single din carplay

I have a 2007 F430 Spider with hi-fi high powered Becker unit non- Bose system with the green connector for speaker out …. Do I need to get the scuderia wiring harness for this to be plug in play… looked through the complete thread and this seems like the right solution. Found the link to this, but it doesn’t seem to take you directly to this harness just to the webpage. Do I need to call and talk to him to actually get this specific hardness could not find it on the site? Thanks for your help

 

Ok looks like I just need this
Metra 70-1784 Radio Wiring Harness from Amazon. And the block c connectors (yellow, blue, and green are not used at all in this configuration…. Just the connectors from block A and B… block designations from diagram for stock head unit. Just trying to confirm this … thanks

 

So, I finally got to “installing it” but…. No audio! I am an absolute novice at this; any ideas?


Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login

 

I’m not as familiar with the audio setup in the 360, but where are your RCA cables going? Is there an amp? If not, you have to wire in the speaker wires from the harness to the PA unit.

 

I think you might need to figure out what type of audio setup you have to begin with. You have used the pre-outs which may not be correct for every setup. Try using the standard outputs (you may need a different harness adapter).

 

Howdy!

Found a solution as said the RCA cables weren’t necessary! This is the wiring we ended up with
Image Unavailable, Please Login

 

Sub'd.
Just scored the head PA head unit, camera, wireless adapter, etc. Excited to install it, and this thread will (obviously) come in handy. Thanks guys!

 

Just a little heads up on the PowerAcoustic CP-71W. It now ships with the latest software. Making a compatible USB drive was the hardest part of the upgrade since it really needed a proper format vs what Windows/OSX do by default and if you aren't a computer person it could be confusing.

I bought a unit for my son and was pleasantly surprised when I powered it on using a lab supply to test a bootscreen and wallpaper, which required the upgrade to be installed first previously.

Image Unavailable, Please Login Image Unavailable, Please Login

 

I've gotten a little lost in all the various wiring harness options listed in the thread.

I have a 2008 Scuderia with the base audio system - am I looking for the Metra 1786, or the Metra 1784?