612 Side Mirror Indicators - keep falling out at high speed | FerrariChat
Buy

612 Side Mirror Indicators - keep falling out at high speed

Discussion in '612/599' started by Mark612, Sep 27, 2025.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Mark612

    Mark612 Rookie

    Apr 1, 2023
    38
    Twente
    Full Name:
    Mark
    #1 Mark612, Sep 27, 2025
    Last edited: Sep 27, 2025
    Hi Everyone,

    When I drive at higher speed with my '06 612 my car has a very annoying tendency to fart out the indicator glass which then is dangling and hanging on to the wiring.

    I have looked if I can buy then somewhere but no luck. The ferrari partnumber is sn01904591800, but maybe this is an item used in other cars as well.

    Does anyone know if this part is available?

    Thanks!
    Mark
     
  2. LondonParis

    LondonParis Formula Junior
    Rossa Subscribed

    Sep 30, 2020
    538
    Houston/London/Paris
    Full Name:
    Bill Coates
    #2 LondonParis, Sep 27, 2025
    I am a bit confused as to which part you are referring to, is it the puddle light under the side mirrors, or the yellow indicator light on the side behind the front wheel, or is it the side mirror glass itself, or something else entirely (when i enter the part number you provided it shows a climate control face plate for a 575)


    Bill
     
  3. Mark612

    Mark612 Rookie

    Apr 1, 2023
    38
    Twente
    Full Name:
    Mark
    #3 Mark612, Sep 30, 2025 at 11:26 AM
    You are correct Bill - my mistake its a puddle light indeed. I will double check the partnr again I read it under low light conditions.
     
  4. LondonParis

    LondonParis Formula Junior
    Rossa Subscribed

    Sep 30, 2020
    538
    Houston/London/Paris
    Full Name:
    Bill Coates
    #4 LondonParis, Sep 30, 2025 at 11:34 AM
    Ok...i have changed both on my 612...it is just a plastic case, the light is reused. On the driver side you will need to splice the wires to the temp sensor (they have to be cut to remove the old housing). IIRC the parts were 50 dollars a side.

    Bill
     
  5. Mark612

    Mark612 Rookie

    Apr 1, 2023
    38
    Twente
    Full Name:
    Mark
    #5 Mark612, Oct 4, 2025 at 9:13 AM
    Thanks for sharing your experience, will do the same!
     

Share This Page