Speedi - Sleeve supplier | FerrariChat
Buy

Speedi - Sleeve supplier

Discussion in 'Vintage (thru 365 GTC4)' started by jimmyr, Oct 5, 2025 at 9:10 PM.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. jimmyr

    jimmyr Formula Junior

    Oct 10, 2004
    348
    Scottsdale, AZ
    Full Name:
    Jim
    #1 jimmyr, Oct 5, 2025 at 9:10 PM
    Looking for a source and part number for a Speedi - Sleeve to repair our Daytona trans input shaft leak. A new seal failed after a few miles and lube drips into the torque tube. Suspect a scuffed or worn seal surface on the shaft.
    Image Unavailable, Please Login
     
  2. DWR46

    DWR46 Formula 3
    Honorary

    Jun 19, 2012
    2,060
    #2 DWR46, Oct 5, 2025 at 10:05 PM
    Jim: NAPA, McMaster-Carr, Berry Bearing, Motion Industries, all the major bearing suppliers. SKF makes metric sizes as do most other suppliers.
     
  3. jimmyr

    jimmyr Formula Junior

    Oct 10, 2004
    348
    Scottsdale, AZ
    Full Name:
    Jim
    #3 jimmyr, Oct 6, 2025 at 10:44 AM
    Dyke, thanks for the info; will try MPI and see if they have the correct pn for the Daytona.
     
  4. DWR46

    DWR46 Formula 3
    Honorary

    Jun 19, 2012
    2,060
    #4 DWR46, Oct 6, 2025 at 5:25 PM
    Jim: I think you will have to do it by dimensions, and not a specific part number.
     
  5. jimmyr

    jimmyr Formula Junior

    Oct 10, 2004
    348
    Scottsdale, AZ
    Full Name:
    Jim
    #5 jimmyr, Oct 6, 2025 at 7:09 PM
    Dyke, I have reached out to MPI and waiting for a reply. If they have a record of their use of these sleeves it would help.
     

Share This Page