Rear Dashcam fell into panel while bringing roof down. | FerrariChat
Buy

Rear Dashcam fell into panel while bringing roof down.

Discussion in 'Technical Q&A' started by CHAN0007, Oct 7, 2025 at 7:24 PM.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. CHAN0007

    CHAN0007 Rookie

    Oct 1, 2025
    6
    Full Name:
    James Chan
    #1 CHAN0007, Oct 7, 2025 at 7:24 PM
    Hi

    As per the above thread header.

    It resulted in my boot being misaligned cos the boot was trying to push down but couldnt as the camera was in the way. Workshop now trying to access the boot manually through the back seats.

    Anyone had this issue before?
    Image Unavailable, Please Login
     
  2. Alden

    Alden F1 Rookie
    Rossa Subscribed

    Apr 25, 2010
    3,744
    Central Florida
    #2 Alden, Oct 7, 2025 at 9:08 PM
    A little more info would be nice. Sorry, but no one here is going to try to guess your model, year and location.
    Alden
     
  3. CHAN0007

    CHAN0007 Rookie

    Oct 1, 2025
    6
    Full Name:
    James Chan
    #3 CHAN0007, Oct 7, 2025 at 9:11 PM
    Dec 2011 California, Singapore.
    Thanks
     
  4. Snapshift

    Snapshift Formula Junior
    Rossa Subscribed

    May 31, 2020
    938
    Centralia IL
    Full Name:
    Lyle D. Pahnke
    #4 Snapshift, Oct 8, 2025 at 12:05 AM
    Will the roof go back up? I gather it is jammed open with the camera. Perhaps attempting to "help" it up while trying to raise the roof might get it to cycle closed and be able to grab the camera. GL with this.
     
  5. CHAN0007

    CHAN0007 Rookie

    Oct 1, 2025
    6
    Full Name:
    James Chan
    #5 CHAN0007, Oct 8, 2025 at 12:07 AM
    I managed to get the dash cam out from its previously lodged position. After that, the back panel refuses to move further even when i tried to complete the cycle. Sigh
     
  6. Snapshift

    Snapshift Formula Junior
    Rossa Subscribed

    May 31, 2020
    938
    Centralia IL
    Full Name:
    Lyle D. Pahnke
    #6 Snapshift, Oct 8, 2025 at 12:11 AM
    maybe it can be activated with a Launch OBD reader/programmer. Must have mis aligned some sensors. These can be very tricky. Mine once jammed in a half open position but was able to be cleared with the launch system.
     
  7. CHAN0007

    CHAN0007 Rookie

    Oct 1, 2025
    6
    Full Name:
    James Chan
    #7 CHAN0007, Oct 8, 2025 at 12:13 AM
    Thanks. I think thats what my workshop is doing too.
     
  8. CHAN0007

    CHAN0007 Rookie

    Oct 1, 2025
    6
    Full Name:
    James Chan
    #8 CHAN0007, Oct 8, 2025 at 2:14 AM
    But man.. i really wanna kick myself for not checking before hand!
     
  9. CHAN0007

    CHAN0007 Rookie

    Oct 1, 2025
    6
    Full Name:
    James Chan
    #9 CHAN0007, Oct 8, 2025 at 6:33 PM
    Phew.. managed to resolve the issue.. not sure how .. but heard alot of parts were removed ... folding cycle back to normal too!
     
    Willl likes this.

Share This Page