Vinyl Moisture Barrier in Doors | FerrariChat
Buy

Vinyl Moisture Barrier in Doors

Discussion in '308/328' started by NoGoSlow, Oct 13, 2025 at 11:56 PM.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. NoGoSlow

    NoGoSlow Formula Junior
    Silver Subscribed

    Jul 29, 2014
    642
    Republic of Texas
    Full Name:
    Mark Jacks
    #1 NoGoSlow, Oct 13, 2025 at 11:56 PM
    Does anybody have a source (or recommendation) for the vinyl sheet used to seal doors and keep moisture from the interior in a Dino 308 GT4?

    In disassembling my doors I found two different liners... one is a clear plastic sheet and the other is a gray colored vinyl sheet with a fine fabric-like texture on one side. I suspect the latter is OEM, but that's only a guess.

    I'm looking for confirmation and for where to source the material. Thanks in advance!
     
  2. Imatk

    Imatk Formula Junior

    May 6, 2007
    842
    #2 Imatk, Oct 14, 2025 at 4:42 AM
    As long as they do the job it doesn't "really" matter what color they are. If you really want the same color you can find vinyl sheeting in rolls you can cut yourself. I'm sure it's way cheaper than a Ferrari part.

    Mine had long lost its sheeting so I re-did both sides when I did my window motors.


    This is what I used:
    https://www.amazon.com/dp/B0040ZC5AO?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_4
     

Share This Page