Portofino Door Trim Removal | FerrariChat

Portofino Door Trim Removal

Discussion in 'California(Portofino)/Roma(Amalfi)' started by VII7, Oct 18, 2025 at 7:53 PM.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. VII7

    VII7 Rookie

    May 29, 2025
    48
    Fort Worth TX
    The inner seal edge of my door pannel was warped, likely from the factory, so decided to remove to correct. Notes in case they help someone in the future:

    1. Woofer grill, just pulls out
    2. Door pull, inner side just pressure clips, then remove IIRC T15 for outer side



    Image Unavailable, Please Login Image Unavailable, Please Login
     
  2. VII7

    VII7 Rookie

    May 29, 2025
    48
    Fort Worth TX
  3. VII7

    VII7 Rookie

    May 29, 2025
    48
    Fort Worth TX
    #3 VII7, Oct 18, 2025 at 8:01 PM
    Last edited: Oct 18, 2025 at 8:13 PM
    5. Main pannel is revealed screws + 3 screws in bottom of door + 2 screws behind speaker + pressure clips
    6. Door card slides inward in the front, then slide forward and outwards and lift to release in the rear
    Image Unavailable, Please Login
     

    Attached Files:

    Redneck Slim likes this.
  4. VII7

    VII7 Rookie

    May 29, 2025
    48
    Fort Worth TX
    Side commentary, did they really have to give a chance to every screw supplier in Europe?
    This is by far the greatest number of screws with the best variety I've ever encountered on a door panel by a long shot.
     

Share This Page