Retain Rear Parking Brake with 360 Big Brake Kit? | FerrariChat

Retain Rear Parking Brake with 360 Big Brake Kit?

Discussion in '360/430' started by No-Subt2, Oct 21, 2025 at 7:03 AM.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. No-Subt2

    No-Subt2 Karting
    Silver Subscribed

    May 6, 2019
    90
    Washington DC metro area
    Full Name:
    Danny
    I want to retain my rear parking brake for my 360 with the addition of a rear big brake kit (rear brake rotors are oversized 380x32). I have 19" Challenge-type rims. Under these circumstances, has anyone found a proven way (or provide recommendations on how) to retain the functionality of the rear parking brake (hopefully via the hand operated rear parking brake lever in the cabin)?
     
  2. LorenzoR

    LorenzoR F1 Rookie
    Rossa Subscribed

    This may help you a little bit, but when I put a big brake kit on my f430 I installed oem calipers but with steel rotors. I had to swap out the e Brake caliper, because it is a little bit different. i'm not familiar with brake options on the 360 but maybe if you go to Eurospares diagrams and look at the part numbers for standard brakes and big brakes.
     
  3. coinball

    coinball Karting

    Dec 1, 2004
    83
    Raleigh, NC
    Full Name:
    Eric
  4. No-Subt2

    No-Subt2 Karting
    Silver Subscribed

    May 6, 2019
    90
    Washington DC metro area
    Full Name:
    Danny
    #4 No-Subt2, Oct 21, 2025 at 9:54 AM
    Last edited: Oct 21, 2025 at 10:11 AM
    I am installing oversized 6 piston calipers (front and back) on the 360.

    I'll look at the factory F430 ebrake caliper for the rear parking brake for the 360. Coinball, I am installing the very same Brembo GT big brake kit as you but on the 360 vice F430, even got the same Type 3 rotors.
     

Share This Page