Help. I need to find a linkage part.

https://www.ferrariparts.co.uk/Diagram/Ferrari/308-GTB-GTS-Carburetor/011-Throttle-Control

Find the exact part you are looking for in the parts diagram and search for the part number

 

May work!

https://www.ebay.com/itm/201391692704?_skw=ferrari+308+linkage+ball&itmmeta=01K846G6GEW5ZFXGFSHD117JHX&hash=item2ee3e15ba0:g:c6EAAOSw0flkntpb&itmprp=enc%3AAQAKAAAA8FkggFvd1GGDu0w3yXCmi1cBkItX3zs7ANTrglOMbRUDWnPtjv8MOAV6T48B%2BeLpYrlJvaxu68hZmOVP%2B1BhTs2UFk4Bz%2Bf0PqOiDYOkII5hUxtqSCQM42g3JiSFQ5XxPNfYKLuUuf6lbaHxl2cRs7jaFr3n0yLW4ddnfZ%2B0hl%2F6D8FBeScFNEcvilJZLBrwLepCOgMHVF86JyXGg3B3b3wzqXNhR%2BQ99wCh98q%2BJwa6LS8oorVdT661ceAihl7%2FwgKcxRE3v9QOW%2FnycGnFXmLLZD6NYSlhNYKtvZt06z6FIg%2FiaJ6y%2FHDZ%2Bz97sAlUaA%3D%3D%7Ctkp%3ABk9SR6zowIbBZg

 

i can't tell from the picture.

Is this like a tie rod end? Those are pretty standrd items and can be sourced at Mcmaster Carr.

https://www.mcmaster.com/products/tie-rod-ends/


Image Unavailable, Please Login

 

I can't tell from your photo if the stud is swagged on or through bolted to the bracket. These ball attachments are very common to Weber equipped cars and come in all sorts of configurations. Here is a link to one for a Fiat 124.

https://autoricambi.us/ball-stud-for-carburetor-linkage/?setCurrencyId=1


Image Unavailable, Please Login

 

Well that 's a crappy bit of luck.....and it is swagged; you can see the swagged part of the post that lives on the opposite side of the pivot just above the area Lee circled (I just happen to have mine on the bench atm). If that were mine Lee, for $230 I'd be tempted to drill out what's left of the stud and explore the website Mark posted the link to and see if you can find a bolt-on replacement. Good luck.
- Dave

 

Here is another ball stud, a little more expensive but it comes with a nut.

https://www.piercemanifolds.com/5_16_8MM_BALL_STUD_p/700.123.htm