430 - CCM Disc Replacement | FerrariChat
Buy

430 CCM Disc Replacement

Discussion in '360/430' started by MKTViper, Oct 21, 2025 at 4:16 PM.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. MKTViper

    MKTViper Karting
    Silver Subscribed

    Oct 9, 2018
    214
    Swan Point MD
    Full Name:
    Mike
    #1 MKTViper, Oct 21, 2025 at 4:16 PM
    Thought I'd pulse the community to see what options are out there. I used my CCMs on the track alot and pretty much spent them in half the time as expected. Now I've got to replace my front CCM rotors (and rears aren't that far behind). I'm looking at ReBrake to have them resurfaced for about $5000 including shipping.

    I've also seen a complete CCM Front/Rear set on eBay for $5800. The donor car (reportedly) had 36K miles on it. I asked for the weight of the fronts, and with the hats they're 5300g.

    Does anyone know the minimum weight spec on front (and rear) CCM discs?

    My F430 has 55K miles on it, so a used set with 36K would be completely fine. I'm just weary about the weight.

    Any other non-OEM or resurfacing options out there?
     
  2. GogglesPisano

    GogglesPisano F1 Rookie
    Silver Subscribed

    Sep 13, 2022
    3,335
    East Bay, California
    Full Name:
    Joe
    #2 GogglesPisano, Oct 22, 2025 at 12:20 AM
    Thoughts on going steel for track use? I think that’s what a lot of people end up doing just to save from wearing through carbons. I think Giro Disc makes replacements that fit right in.
     
  3. MKTViper

    MKTViper Karting
    Silver Subscribed

    Oct 9, 2018
    214
    Swan Point MD
    Full Name:
    Mike
    #3 MKTViper, Oct 22, 2025 at 3:33 AM
    Yes, that’s what I do (now). Girodisc.
     
  4. CoreyNJ

    CoreyNJ F1 Rookie
    Silver Subscribed

    Apr 17, 2006
    2,545
    New Jersey Shore
    #4 CoreyNJ, Oct 22, 2025 at 1:06 PM
    I'd be curious to know if anyone has done reBrake reconditioning. I don't track my 430, but in the future, when I need rotors, it would be nice to have options, and I am not going to steel because I like the lack of brake dust.
     

Share This Page