BB512 and 365 front hood/bonnet latch? | FerrariChat
Buy

BB512 and 365 front hood/bonnet latch?

Discussion in 'Boxers/TR/M' started by NGTTwo, Oct 24, 2025 at 3:27 PM.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. NGTTwo

    NGTTwo Rookie

    Sep 16, 2025
    21
    Northeast
    Full Name:
    Basel Basel
    #1 NGTTwo, Oct 24, 2025 at 3:27 PM
    Hi these appear to be NLA, any idea on how to refurbish or repair them? Mine is a little bent, has the pin missing, etc. and not latching on one side.

    Thank you!
     
  2. NGTTwo

    NGTTwo Rookie

    Sep 16, 2025
    21
    Northeast
    Full Name:
    Basel Basel
    #2 NGTTwo, Oct 24, 2025 at 3:46 PM
  3. NGTTwo

    NGTTwo Rookie

    Sep 16, 2025
    21
    Northeast
    Full Name:
    Basel Basel
    #3 NGTTwo, Oct 25, 2025 at 10:09 PM
    Since I resigned to the fact these are NLA, I had to make do with what I had...good news the fix wasn't that bad. Key being getting everything flat and finding a 3/16" pin to put back in place--ends up a brass pin that you can hammer on the ends so you get it to mushroom out so it doesn't come apart is great. Here are some pics...

    Image Unavailable, Please Login

    Image Unavailable, Please Login

    Image Unavailable, Please Login

    Image Unavailable, Please Login

    Image Unavailable, Please Login


    Image Unavailable, Please Login

    Image Unavailable, Please Login
     
    Warlock and samsaprunoff like this.
  4. Newman

    Newman F1 World Champ
    Consultant Owner Professional Ferrari Technician

    Dec 26, 2001
    14,547
    Canada
    Full Name:
    Newman
    #4 Newman, Oct 28, 2025 at 6:47 AM
    Good job, those are still available if one was stuck. The early 365 flat ones without the curved ribs are a different story.
     
  5. NGTTwo

    NGTTwo Rookie

    Sep 16, 2025
    21
    Northeast
    Full Name:
    Basel Basel
    #5 NGTTwo, Oct 28, 2025 at 7:31 AM
    Here's a million dollar question, what happens on the BB if the cable breaks or the latch(es) get stuck with the hood in the closed position?

    There doesn't look to be any backup way of opening the hood for latch repair?
     
  6. turbo-joe

    turbo-joe F1 Veteran

    Apr 6, 2008
    9,644
    southwest Germany, France ( Alsace ) and Thailand
    Full Name:
    romano schwabel
    #6 turbo-joe, Oct 28, 2025 at 12:19 PM
    on my BB there are on all 4 latches 2 cables
     
    NGTTwo likes this.
  7. NGTTwo

    NGTTwo Rookie

    Sep 16, 2025
    21
    Northeast
    Full Name:
    Basel Basel
    #7 NGTTwo, Oct 28, 2025 at 12:21 PM
    Same here but what if a latch rusts/freezes shut/etc...there can be a few ways it would get stuck, no?
     
  8. turbo-joe

    turbo-joe F1 Veteran

    Apr 6, 2008
    9,644
    southwest Germany, France ( Alsace ) and Thailand
    Full Name:
    romano schwabel
    #8 turbo-joe, Oct 28, 2025 at 5:49 PM
    before such a part will rust and not work any more you will see/feel that there is something not ok - if you have a little technical understanding
     
    NGTTwo likes this.
  9. Newman

    Newman F1 World Champ
    Consultant Owner Professional Ferrari Technician

    Dec 26, 2001
    14,547
    Canada
    Full Name:
    Newman
    #9 Newman, Oct 28, 2025 at 7:45 PM
    If you had terrible luck, you would need to cut a hole in the front inner fender to access the latch. On the rear, the gas tank access panels give you latch access.

    You will have (should have) a pull cable with a loop in the glove box and one behind the small storage pocket.
     
    NGTTwo likes this.

Share This Page