Distributor seal 308gtsi | FerrariChat
Buy

Distributor seal 308gtsi

Discussion in '308/328' started by SammySwift, Oct 24, 2025 at 6:59 AM.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. SammySwift

    SammySwift Rookie

    Mar 24, 2025
    2
    Full Name:
    Sammy Swift
    #1 SammySwift, Oct 24, 2025 at 6:59 AM
    Hi all, I’m new to the forum as I bought my 308 gtsi earlier this year and it is a project car. I’m enjoying using it and fixing (or trying to fix) the jobs as they arise and so far so good, nothing has been too major. At the moment I’m working on an oil leaky distributor cap and seals. I’ve bought what seem to be the right bits for the model but the seal I took out seemed wrong compared to that which I intend to fit. HOWEVER, the new seal looks very delicate for squeezing into the housing as it is metal and appears to need to go in backwards. My question is, is this correct? Here is a photo of the parts.

    Thanks for any feedback that can be offered, Sammy
    Image Unavailable, Please Login
     
  2. Imatk

    Imatk Formula Junior

    May 6, 2007
    858
    #2 Imatk, Oct 24, 2025 at 10:48 AM
    Had the same thing... it's probably the correct seal.

    Check this out

     
    SammySwift likes this.
  3. SammySwift

    SammySwift Rookie

    Mar 24, 2025
    2
    Full Name:
    Sammy Swift
    #3 SammySwift, Oct 25, 2025 at 7:09 AM
    Thanks for this. I just hope this fixes the oil leak and it doesn't turn out to be the bigger problem of the camshaft o-ring.
     
    Imatk likes this.
  4. Imatk

    Imatk Formula Junior

    May 6, 2007
    858
    #4 Imatk, Oct 25, 2025 at 1:56 PM
    I hope so too for your sake, if it's the o-ring you have to pull the cam. Mine had to be drilled out. I didn't feel confident doing that myself so... it's expensive :/
     

Share This Page