Waterhoses in the front trunk

I'm guessing this is a 328?

Not sure if you'll need a Ferrari hose necessarily. You could likely find a 180 degree hose if the F part is too costly.

If you're going to do them though, and haven't done your heater hose the goes to the rear of the car that probably needs to be done as well.

The 308 doesn't have any curved hoses... it uses metal curves. And there's also a kind of wishbone metal attachment as well.

If you have those, and again haven't changed them, you'll likely need to de-rust them and re-plate.

Image Unavailable, Please Login

 

In the past, i have used two copper plumbing ells, four hose clamps, and then straight hose to replace unavailable U bend hoses on other cars.

if you can't see it easily, nobody will know. Paint the copper pieces black and its even less noticable.

Doug

 

Image Unavailable, Please Login

I used a normal rubber hose that you can easily bend.

 

Image Unavailable, Please Login

?? Wat bedoel je ? Dat is de leiding op het verwarmingsventiel zoals op jouw foto.
Que voulez-vous dire ? C'est le tuyau de la vanne de chauffage, comme on le voit sur votre photo.

 

Je hebt waarschijnlijk de buis van het verwarmingselement gemeten, die wat smaller is. De rubberen leidingen die ze verkopen in een auto-part shop zijn nogal soepel en kunnen veel rek verdragen. En een beetje Dreft helpt ook bij het aanbrengen....