430 Carbon engine panels

Here is a photo of my OEM engine bay panels with Scud airboxes.
Image Unavailable, Please Login

 

John that is helpful and I plan on doing the same. Are both of those epdm? Looks like they are

 

I guess I'll add my two cents. Hopefully it helps. I have full carbon engine bay. Carbonio Air boxes, Coolant box cover (can't recall brand. came with the air boxes from forum member), Exotic Car Gear engine bay panels (all 5). Fitment is pretty good. I did modify my engine panels. The standoffs on the on the big side panels were a little long in my opinion, so I cut them down a little to move the panel away from the brace in the engine bay. They've all held up well. Only real issue I have is the coolant cover is starting to yellow a bit. In all fairness it had a little yellow to it when I bought it. I know at some point the air boxes and that will need to be sanded and re-cleared due to the heat from my IPE exhaust being so close to those components. I've had the panels for 3years and the air boxes & coolant cover for 4 years.
Image Unavailable, Please Login Image Unavailable, Please Login

 

Hey Lorenzo ,

No, I use an EPDM washer as a base that comes in contact with the carbon fiber, The other is a raised washer by ‘ARP’ that is metal. It hides the EPDM washer nicely, and I like the look of the thicker, raised washer, gives some visual heft.

 

Thanks, john.I'll be getting these on order soon