technistrada | FerrariChat

technistrada

Discussion in '348/355' started by u2fast, Nov 5, 2025 at 7:08 AM.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. u2fast

    u2fast Formula Junior

    Joined:
    Mar 22, 2009
    Messages:
    257
    Location:
    bellaire
    Full Name:
    barry r
    about to pull the trigger on technistrada catalytic temp control station for my 355. chime in if you are using them and are you happy with them. thx barry
     
    u2fast, Nov 5, 2025 at 7:08 AM
    #1
  2. mkz

    mkz Rookie

    Joined:
    Jun 19, 2023
    Messages:
    7
    I bought the cats ECUs and the termocouples for my 98' 355 F1 and no headaches after that. They are not physically exact to the original parts (so Ferrari Clasicche wouldn't approve them) but technically solve the recurrent problem of the original ECUs, at a cheaper way. I would go for them eyeblinded again.
     
    mkz, Nov 5, 2025 at 10:12 AM
    #2
    u2fast likes this.
  3. bobzdar

    bobzdar F1 Veteran

    Joined:
    Sep 22, 2008
    Messages:
    6,958
    Location:
    Richmond
    Full Name:
    Pete
    I have one on mine, solved the periodic warning light I'd get.
     
    bobzdar, Nov 5, 2025 at 10:30 AM
    #3
    u2fast likes this.
  4. Qavion

    Qavion F1 World Champ Silver Subscribed

    Joined:
    Feb 20, 2015
    Messages:
    14,675
    Location:
    Sydney
    Full Name:
    Ian Riddell
    No issues with mine after 4~5 years.

    As mentioned, they are different in appearance... smaller, lighter, but with the same mounting system.
     
    Qavion, Nov 5, 2025 at 1:37 PM
    #4
    u2fast likes this.
  5. cactussed

    cactussed Formula Junior

    Joined:
    Mar 12, 2008
    Messages:
    300
    Ironically, I purchased the bypass things for when I'm on the track, and the damn lights still start flashing after a while (albeit they don't go into limp mode)
     
    cactussed, Nov 6, 2025 at 2:59 AM
    #5

Share This Page