Wheel spacers | FerrariChat
Buy

Wheel spacers

Discussion in 'Boxers/TR/M' started by cgt000, Oct 29, 2025.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. cgt000

    cgt000 Formula Junior
    Silver Subscribed

    May 2, 2014
    798
    Northeast
    #1 cgt000, Oct 29, 2025
    I would like to install wheel spacers on my 512M for aesthetic reasons only. Could you please advise what size you recommend for the front and rear?

    Specifically, would 15mm in the front and 20mm in the rear cause any issues such as fender interference?

    Thank you in advance for your advice.
     
  2. Auraraptor

    Auraraptor F1 World Champ
    Lifetime Rossa Owner

    Sep 25, 2002
    14,261
    MO
    Full Name:
    Omar
    #2 Auraraptor, Nov 7, 2025 at 6:51 PM
    Yes. That’s too high.

    I recommend to start by getting a 15 mm spacer and seeing how it works for you in the rear. Please realize that 15mm is essentially the upper limit of what is safe/feasible fit in the rear without potential fender rubbing (depending on the overall condition of your suspension and your alignment).

    You can run 15mm in the front without issue. Personally I think the optimal set up would be 15mm in the front and 10 vs 11mm in the rear, but I really really don’t like when wheels stick out “hot wheels” style beyond the fender.

    I ran 11mm spacers in the front to clear my brakes. Photo:
     

    Attached Files:

Share This Page