328 Coolant Dribble | Page 2 | FerrariChat
Buy

328 Coolant Dribble

Discussion in 'Technical Q&A' started by ScuderiaRossa, Mar 15, 2004.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

Page 2 of 2
  1. ScuderiaRossa

    ScuderiaRossa Formula 3
    Silver Subscribed

    Mar 22, 2001
    2,230
    #26 ScuderiaRossa, Mar 24, 2004
    Doc, I just bought a Stant cap rated for 16 PSI, which is more than enough. They go as high as 20 PSI; found it in a Pep Boys of all places. Installed it this past weekend, and no more dribble! Have a factory cap on order for concours though.
     
  2. ScuderiaRossa

    ScuderiaRossa Formula 3
    Silver Subscribed

    Mar 22, 2001
    2,230
    #27 ScuderiaRossa, Mar 24, 2004
    The part # for the .9 factory cap was 101499, changed to 137644 when the bar rating was upgraded to 1.1
     
  3. 4re gt4

    4re gt4 Formula 3

    Apr 23, 2002
    2,279
    Roseburg, OR
    Full Name:
    Hans E. Hansen
    #28 4re gt4, Mar 24, 2004
    Uh, I meant an aftermarket (NAPA, or whatever) for the .9 cap.
     
  4. groovzilla

    groovzilla Karting

    Nov 28, 2003
    117
    seattle, wa.
    Full Name:
    william
    #29 groovzilla, Mar 24, 2004
    had the same coolant dribble with my 308GTS...as dave handa suggested i checked the cap and coolant level...

    coolant level was fine so i made sure the cap was secure...

    no dribbles since...

    so i think the cap was the culprit...
     
Page 2 of 2

Share This Page