Pattern or specs to make 328 targa top cover | FerrariChat

Pattern or specs to make 328 targa top cover

Discussion in '308/328' started by dhs-9, Apr 8, 2004.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. dhs-9

    dhs-9 Formula Junior

    Feb 6, 2004
    292
    #1 dhs-9, Apr 8, 2004
    I have been pricing out this part and it runs about $400. I have been advised that the part is just vinyl and could easily be be made by a upholstery shop. Does anyone have any diagram photos or drawins or specs to assist in making one as close to the original as possible.

    Thanks very much

    Dave
     
  2. peajay

    peajay Formula Junior

    Apr 17, 2002
    454
    near Paris, France
    Full Name:
    Paul
    #2 peajay, Apr 8, 2004
    I bought a piece of black vinyl and my wife made a bag for my 328 targa top, cost was only about $10-15. We just laid the bag on the ground and made a bag to fit, the top has a flap that is fixed with Velcro. I know the original items were not bags but simply a piece of vinyl clipped to the back shelf, but a bag seems to work fine. The cost of material is so cheap you can't go far wrong if you just make up the design as you go along.
     

Share This Page